Sony KDL-46ex520

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • Global Safari
    Member
    • Nov 2019
    • 32
    • United States
    #41
    Re: Sony KDL-46ex520

    I just did a continuity test on the 3 fuses.All tested fine except F6001. Read bad. This is the culprit. Can it be replaced ( looks very small) or is this a whole board replacement.
    Last edited by Global Safari; 12-02-2019, 06:26 PM.

      Comment

      • budm
        Badcaps Legend
        • Feb 2010
        • 40746
        • USA
        #42
        Re: Sony KDL-46ex520

        https://www.badcaps.net/forum/attach...2&d=1575327673
        As I suspected, F6001. Check the resistance between Ground and the bottom leg of the fuse to see if it shows low resistance reading or not.
        Also check those caps you had marked earlier to see if they show low resistance reading or not.
        You can use through hole type fuse since the board has lots of room for through hole type fuse such PICO fuse.
        Last edited by budm; 12-02-2019, 07:08 PM.
        Never stop learning
        Basic LCD TV and Monitor troubleshooting guides.
        http://www.badcaps.net/forum/showthr...956#post305956

        Voltage Regulator (LDO) testing:
        http://www.badcaps.net/forum/showthr...999#post300999

        Inverter testing using old CFL:
        http://www.badcaps.net/forum/showthr...er+testing+cfl

        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
        http://s807.photobucket.com/user/budm/library/

        TV Factory reset codes listing:
        http://www.badcaps.net/forum/showthread.php?t=24809

          Comment

          • Global Safari
            Member
            • Nov 2019
            • 32
            • United States
            #43
            Re: Sony KDL-46ex520

            Thanks for the information.

              Comment

              • Global Safari
                Member
                • Nov 2019
                • 32
                • United States
                #44
                Re: Sony KDL-46ex520

                Thanks for the information.. what size PICO fuse would I need?

                  Comment

                  • Global Safari
                    Member
                    • Nov 2019
                    • 32
                    • United States
                    #45
                    Re: Sony KDL-46ex520

                    Found a pack of ( 6 ) 4 amp 125 volt... will order tonight PICO Fuses.

                      Comment

                      Previous 1 2 3 template Next

                      Related Topics

                      Collapse
                      • m1ch43lzm
                        HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                        by m1ch43lzm
                        Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                        Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                        05-12-2025, 08:37 PM
                      • Tynan Dill
                        Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                        by Tynan Dill
                        I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                        Upon bringing it home and plugging it up, it showed a standby light.

                        I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                        The screen seems to blackout and stay black, but with a flashlight I can see the display.

                        With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                        Assuming...
                        ORIGINAL POWER SUPPLY BOARD
                        7 Photos
                        11-22-2024, 01:46 PM
                      • delpiero3
                        Sony Vaio SVS MBX-261 board failure
                        by delpiero3
                        Hi everyone, newcomer in this forum, i watched tons of video from Sorin, i like the way i calmly explain things, i did quite some console repair, i am not that bad at micro-soldering, but troubleshooting where the issue is, is definitely where i still have progress to make. Usually i was able to fix the console because the failure was obvious, or because i was able to find someone with similar measures on the board and was pinpointing what to replace that way.
                        Nevertheless, let's say, i don't come as a total beginner.
                        I have this old laptop, which suit perfectly my needs, with the...
                        10-29-2024, 06:16 AM
                      • huj3r
                        Sony KDL-40Z4500 LCD with stripes and 9 blinks (possible BGC board or harness problem
                        by huj3r
                        Hi there!

                        I have a Sony Bravia KDL-40Z4500 which shows a colored vertical stripes pattern when turning on, with a central black shadow that slowly dissipates within the first 10 seconds.

                        Photo of the situation after the black shadow dissipates:

                        After this behavior the red LED will blink 9 times, then pause for a bit, and blink again 9 times, in a loop.

                        I checked the manual (available here) and this corresponds to "HFR error", quoting from the manual:

                        > This indicates HFR Communication error. [ HFR Communication...
                        08-15-2023, 10:55 AM
                      • cheeky2
                        Sony RB2G Chassis KDL-55W815B MAIN BOARD 2 Blink Error issue resolved! Happy days :)
                        by cheeky2
                        For anyone interested just repaired this Sony Main board TV that had a 2 blink error code, the chassis is a RB2G which is common to quite a few different Sony models. The Ceramic 10uF 25V X7R 1206 capacitor C9114 was shorted which took the smd 2A 0603 fuse out F9101. This was powering the Buck converter TPS54332 which caused no 5V output from it.
                        See the attached picture of the locations of both components. I also attach the best service manual I found for this board for anyone else in a similar position of trying to repair this main board. It's not specific to the TV model however it gives...
                        01-08-2024, 05:56 AM
                      • Loading...
                      • No more items.
                      Working...