Have a Vizio E48-C2. Was told that she heard a loud pop, then her lights went out. An electrician came and reset the breaker but her TV didn't come back on. She brought it to me and I went to look at it, to my surprise, there is only one board in this TV.
When the set is plugged in, the light comes on in the bottom corner and then fades out. I don't know where to check for voltages and can't find schematics for this. I have not broken down the set other than to pull the board out and check the diodes and caps. They all seem ok, but most of this board is microscopic. Any ideas where I should start looking on this?
When the set is plugged in, the light comes on in the bottom corner and then fades out. I don't know where to check for voltages and can't find schematics for this. I have not broken down the set other than to pull the board out and check the diodes and caps. They all seem ok, but most of this board is microscopic. Any ideas where I should start looking on this?
Comment