UN55KS8000 T con or screen?

[jason123]

Re: UN55KS8000 T con or screen?

1206 100 ohm, maybe get 4 or so, replace the resistors, if no joy might need to remove the diode packs, might only need to remove one diode pack maybe both, might both be ok.

Thank you..

[jason123]

Re: UN55KS8000 T con or screen?

Diodes: uClamp6514P (UCLAMP6514P.TNT) or alternative uClamp4014P (UCLAMP4014P.TNT) by Semtech

ESD7004 seems like the right part as it's a pack of 4 diodes in one chip

[jason123]

ESD7004 Does not work. We need a bidirectional TVS - I tried uClamp6514P does work!

[nomoresonys]

So it's working?

[jason123]

Yes, working beautifully

[nomoresonys]

So what was the problem, the diode was not ESD704 as reported by diff?

[jason123]

So what was the problem, the diode was not ESD704 as reported by diff?

Correct #17 stated ESD7004 as an option, I got that and it didn't work. I used the uClamp6514P and that worked fine. System does work without anything stuffed in that location, but I wanted to restore to original factory - bad quality design