Sony KD49X8005C Assistance Required Please.

[Stevie406]

Re: Sony KD49X8005C Assistance Required Please.

could you show us the data printed on the led strip

This is the only text on the strip.
Found this small sticker with a QR code on it.

[Diah]

Re: Sony KD49X8005C Assistance Required Please.

maybe not sure LUXEON FlipChip White smd led chip. 1.4 x 1.4
the first on on the list

[Stevie406]

Re: Sony KD49X8005C Assistance Required Please.

maybe not sure LUXEON FlipChip White smd led chip. 1.4 x 1.4
the first on on the list

They look like the ones on the strips and are the same size. But I don't know if there is any way to know what the correct current handling and the forward Voltage is for the ones on the strips is.

I will order some Just in case they are the correct ones, and in the meantime, I will keep looking to see if I can find out the data for the ones on the strips.

Thank you once again for your invaluable help guys.

[nomoresonys]

Re: Sony KD49X8005C Assistance Required Please.

Wonder if those universal led strips from china would work, was some discussion on here the other day about them.

[Stevie406]

Re: Sony KD49X8005C Assistance Required Please.

Wonder if those universal led strips from china would work, was some discussion on here the other day about them.

It's trying to find what size of chips they are using..... Very hard....
Sorry for giving you guys a headache, But on a plus side, I have learned so much from your advice and guidance, My knowledge is improving with each and every step .... Thanks...

I have a lot of larger LEDs, I was wondering if I stripped back some of the solder mask, I could fit all 36, so they were the same.
Would that work??, or would it do any harm if I tried??

[Diah]

Re: Sony KD49X8005C Assistance Required Please.

how may LED failed at your TV?

[Stevie406]

Re: Sony KD49X8005C Assistance Required Please.

how may LED failed at your TV?

7 in total, I don't know what happened,
I copied the existing wiring but soldered the wires instead of using the plugs and sockets.
After installing all the strips, I began testing each strip one at a time, and that's when I found out 7 of the LEDs were blown.

I don't know if it was by disturbing them, or the number of times I tested them with my DMMs.

[Diah]

Re: Sony KD49X8005C Assistance Required Please.

this is complex.. and make you lost.. 7 never failed a time. are they ar same string or on other too

[Stevie406]

Re: Sony KD49X8005C Assistance Required Please.

this is complex.. and make you lost.. 7 never failed a time. are they ar same string or on other too

They are 1 on one, 2 on another and 4 on another.
Very strange, as they are not next to each other on the 4 one, and it's on the ends on the other 2.
I find it so strange as they were all lighting up with both my DMM and LED tester before I slid the units out of the chassis.

[Diah]

Re: Sony KD49X8005C Assistance Required Please.

what kind of solder iron you use.. can you show us ?

[Stevie406]

Re: Sony KD49X8005C Assistance Required Please.

what kind of solder iron you use.. can you show us ?

I had to increase my temp to 330c due to the large contacts

[zomi]

Re: Sony KD49X8005C Assistance Required Please.

can you post a pic of how you have jumpered the strips.

[Stevie406]

Re: Sony KD49X8005C Assistance Required Please.

can you post a pic of how you have jumpered the strips.

I have dismantled them for testing at the moment, but I will do a sketch of how I wired them up.
2 Minutes while I find a drawing package...

[budm]

Re: Sony KD49X8005C Assistance Required Please.

LCD panel model number: SYV4942.
I would replace all the strips: https://www.aliexpress.com/item/LED-...924937829.html

[Stevie406]

Re: Sony KD49X8005C Assistance Required Please.

LCD panel model number: SYV4942.
I would replace all the strips: https://www.aliexpress.com/item/LED-...924937829.html

Thanks, budm, I'll order them now.

[vinceroger69]

Re: Sony KD49X8005C Assistance Required Please.

thats a good price for all 8 strips

[Stevie406]

Re: Sony KD49X8005C Assistance Required Please.

That's the LED strips ordered. "Thanks to budn for the link."
I'll keep reading thru the forum posts to help further my knowledge, and understanding of TV repairs while I wait on the parts to arrive.

Thanks again guys for sharing your knowledge and for taking the time to help me repair my first TV.

I will notify the minute the strips arrive.

Thanks again....

[Diah]

Re: Sony KD49X8005C Assistance Required Please.

I have dismantled them for testing at the moment, but I will do a sketch of how I wired them up.
2 Minutes while I find a drawing package...

hold on... they are 8 string each had in and out of +-

also it should be so
PSU LED Socket + ----> to first strip+ (IN ) .. first strip - (out ) go to second strig + in , 2S - out go to 3S + in ......and so one untill the 8 string - out should go to PSU socket -

[Stevie406]

Re: Sony KD49X8005C Assistance Required Please.

hold on... they are 8 string each had in and out of +-

also it should be so
PSU LED Socket + ----> to first strip+ (IN ) .. first strip - (out ) go to second strig + in , 2S - out go to 3S + in ......and so one untill the 8 string - out should go to PSU socket -

Yes, The 2nd string is just an extension of the 1st, same for 4th to 3rd, 6th to 5th and 8th to 4th.
This leaves just 1st + IN from +PSU, 1st -OUT to 3rd +IN, 3rd -OUT to 5th +IN, 5th -OUT to 7th +IN, and 7th -OUT back to -PSU.

[Diah]

Re: Sony KD49X8005C Assistance Required Please.

Yes, The 2nd string is just an extension of the 1st, same for 4th to 3rd, 6th to 5th and 8th to 4th.
This leaves just 1st + IN from +PSU, 1st -OUT to 3rd +IN, 3rd -OUT to 5th +IN, 5th -OUT to 7th +IN, and 7th -OUT back to -PSU.

also at end it should be so as this photo