Hi, I have an LG 42LA620V had a backlight issue, when powered on the logo flashed up briefly then screen goes off, sound present. So replaced the LED strips at fault, backlights come on as they should, so put it all back together, and now it has another fault! When turn it on now screen lights up but ..... pics attached
LG 42LA620V another problem now
Collapse
X
-
Re: LG 42LA620V another problem now
Have you put the various panel layers back in the correct order and way round?Willing to help but I'm no expert. -
Re: LG 42LA620V another problem now
Theyre deffinately in the correct order, as I taped the corners together before lifting them out, however they were out a while so I wonder if they the right way round now lol, the thickest rigid one is on the bottom if I remember correctlyComment
-
Re: LG 42LA620V another problem now
The pictures look like backlight LED failure but you did change them all out right? Check the sheeting againComment
-
Re: LG 42LA620V another problem now
when you change inputs, volume, channel, menu etc. does the image change quickly, crisply. ignoring the colour issue that is.WHY CAN'T PHILIPS USE PHILLIPS HEAD SCREWS?Comment
-
Re: LG 42LA620V another problem now
Ive done a factory reset to see if that would rectify, so only screen that comes up is the 1st setup screen, I cant change between inputsComment
-
Re: LG 42LA620V another problem now
interesting. since you have no inputs, the main board would most likely be the issue.
i was actually concerned as to if you may of damaged the panel during your previous repair attempt. hoping it isn't multiple issues.WHY CAN'T PHILIPS USE PHILLIPS HEAD SCREWS?Comment
-
Re: LG 42LA620V another problem now
https://www.badcaps.net/forum/attach...0&d=1530822670
It looks like damaged panel.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: LG 42LA620V another problem now
Upload to Youtube and give the link here.Willing to help but I'm no expert.Comment
-
Re: LG 42LA620V another problem now
one time friend of me tried to change defect LED on same brand 55LA6208, before he replace the LED he told that LG Logo flashing at first start complete with color too, and after he replaced was the issue much like to you.. the first things i went to check for him the ribbon cable, and exact was one the pins Brocken and make short contact. this old TV because of heat the ribbon cable pins easy getting out from its place. also check them under magnifier from both sidesComment
Related Topics
Collapse
-
by theone111I have an LG Plasma TV 60PM6700 for the past ~12 years.
In the last ~3-4 months I have been having some issues.- Problem: It started with random picture disappearing (sound still worked).
Frequency: Happened about once a week.
Solution: Had to turn off TV wait a few seconds before turning it on again. - Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
Frequency: Happened about once a week.
Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve. - Problem: TV shuts down
1 Photo - Problem: It started with random picture disappearing (sound still worked).
-
by KrisbyHello badcaps.net Forum People,
I have a Protek 506 DMM which has a problem with the Diode Test Function and with the 4V range of the Voltage Measuring Function. I have posted this on three other forums, but have not been able to find out the source of the problem.
It seems that the Diode Test problem is linked with the 4V range Voltage Measuring problem, so I shall just focus on the 4VDC range to simplify things.
When I select the DC voltage function on the rotary switch of this DMM, the display alternates between showing 3.999V and 0V. If I test a... -
by Zeonalbastai have a problem with thinkpad X1 carbon gen 2 "LMQ-1MB 12298-2 48.4LY26.021"
The laptop was turned off because the MOSFET was not transmitting voltage. After checking it turned out that the gate pin on the MOSFET was the problem, because it was producing an inappropriate voltage. and it was discovered that the problem was with the Think engine, so I decided to reprint each pin, and finally the mosfet could work properly. However, there is another problem, even though the voltage has been supplied to the laptop, it still won't turn on, there isn't even an LED indicator. After double... -
by Gibon378PC Specs:
- CPU: Ryzen 5 1600
- GPU: GTX 1080 Palit JetStream
- MOBO: ASRock ab350 PRO4
- RAM: Crucial Ballistix Sport 2x8GB 3000MHz (XMP 2.0)
- PSU: XFX 650W (don't remember what model)
- OS SSD: ADATA SP920
- OS: Windows 10 21H2
Problem description:
Hi. I have a problem that has been going on for some time (2-3 years). It's hard to explain what it really is. Sometimes, my computer stops playing music, stops videos (starts buffering on youtube), there is no sound in games and when I minimize the game window and return to the game there is a black screen with window borders... -
by perzyk23Good morning,
I have a problem with Lenovo T580, which after error code 0288 suggests a problem with the display. I checked the display and it works on another laptop. I replaced the display cable with a new one. I programmed another BIOS (downloaded from this forum) and I still have the problem of a dead display - there is an image via HDMI, and the system does not detect the built-in LCD at all. The problem appears to be hardware. What can I check to confirm or disprove this? I found many threads on the Internet related to this problem 0288, but without specific solutions. Please advise.... - Loading...
- No more items.
Comment