I have 3 Ohms on the bottom pad. I have a boardview from LA-B802P (similar to my board). The bottom pad is connected to the CPU but if I check the resistance with the RC137 resistor then I have 1.13 kOhm. On the other resistors next to it it is also high. The R137 resistor itself has 1.13 kOhm. It's possible that these values are too small for this processor anyway. The top pad is 30 kOhm.
PL500: 30 kOhm
PL100 still has 0,8 Ohm but it connects to the PU100 system. Pin 6, 19, 20. I'll check if that's the problem here....
Leave a comment: