Haier hl40xp1. Very bright. T-con board? t400hw01 v4

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • erickeri1234
    Senior Member
    • May 2013
    • 98
    • usa

    #1

    Haier hl40xp1. Very bright. T-con board? t400hw01 v4

    Was just giving this tv. Haier hl40xp1 when it's on it is very bright. I can see what's on, Just really bright. I'm thinking it the t-con board. I fixed one years ago but I don't remember what the pin pads on the t-con board are suppose to be.
    Low to high I believe, but I'm getting 1.1v , 1.4v and 1.5v from just about all the pins. T-con board T400hw01 v4
    They need to gradually climb up in voltage right?
    But anyways does it sound like it's the t-con board anyways???m
    Thanks
    Last edited by erickeri1234; 07-22-2017, 08:42 PM.
  • dskall
    Badcaps Legend
    • Oct 2016
    • 2905
    • usa

    #2
    Re: Haier hl40xp1. Very bright. T-con board? t400hw01 v4

    Maybe some pictures of screen
    I assume no responsibility for any stupid suggestions I might post.

    Comment

    • attainteddragon
      Badcaps Veteran
      • Apr 2013
      • 764
      • australia

      #3
      Re: Haier hl40xp1. Very bright. T-con board? t400hw01 v4

      list your vgma voltages.

      does sound like the as15 chip though.

      couple of pics would not go astray either.
      WHY CAN'T PHILIPS USE PHILLIPS HEAD SCREWS?

      Comment

      • erickeri1234
        Senior Member
        • May 2013
        • 98
        • usa

        #4
        Re: Haier hl40xp1. Very bright. T-con board? t400hw01 v4

        Pics of front and back.
        Attached Files

        Comment

        • dskall
          Badcaps Legend
          • Oct 2016
          • 2905
          • usa

          #5
          Re: Haier hl40xp1. Very bright. T-con board? t400hw01 v4

          You have like 22 VGMA points on t-con you can measure and post
          I assume no responsibility for any stupid suggestions I might post.

          Comment

          Related Topics

          Collapse

          • kca
            LG 82UN8570AUD ~ TCON or PANEL?
            by kca
            Hello all ~

            Hope this finds you well. This LG 82UN8570AUD (April 2021 model) 4K UHD television has full audio capabilities but video is compromised / problematic.

            When I picked up this large LG tv it had a full black screen upon startup. Previous owner said it just went black one day. No popping sound or anything else of note.

            I got the display to work by taping off several traces of the right-hand side ribbon cable on the TCON that leads from TCON to PANEL. However, despite dozens and dozens of attempts to find the right combination / range of traces taped...
            08-31-2025, 06:38 AM
          • x_orange90_x
            TCL 50S535 bad tcon or panel issue?
            by x_orange90_x
            Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
            03-29-2025, 11:02 PM
          • advant
            Driving a Sharp TCON/panel with a universal main board
            by advant
            This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

            I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
            02-03-2020, 12:25 AM
          • netgearnetgear
            TCL 43S423 TCON OR PANEL FAULTY???
            by netgearnetgear
            Good day, I have a TCL TV: Model 43s423. After turning ON the TV, the ROKU TV logo appears with fine lines over the whole screen, then after a while there are vertical bands in the middle of the screen top to bottom and the TV tries to update its firmware but I do not have the remote to connect it to my new network connection. Also the Power ON light blinks 2 times in quick succession. When I remove the ribbon on the right of the tcon board the left side of the screen shows but with fine lines. If I remove the left side ribbon and connect the right side ribbon the whole screen is blank with...
            08-20-2025, 06:04 PM
          • Daren87
            Sony 8K XBR-75Z8H White Screen Vertical Bars Tcon Code. Help Needed🙏
            by Daren87
            Hello everyone,

            I've recently been given a Sony 8k Z8H. It's got a white screen with two vertical black bars. At times it's given me the 5 blink Tcon code. Testing voltage on the Tcon I can see some low or missing voltage. I've done a basic visual check of cables and the COF. Not seeing anything obvious. The original Tcon seemed to have good caps until turning it over. On the bottom I found maybe 10 caps with both sides of the caps shorting to ground. I thought ok these caps and likely other components on the Tcon are shorted so let's try a replacement Tcon. I just received the...
            08-13-2023, 03:25 PM
          • Loading...
          • No more items.
          Working...