Eeprom dump thread!
Collapse
This is a sticky topic.
X
X
-
-
-
Comment
-
Re: Eeprom dump thread!
Need firmware file for Gocomma G600 1 - 600X 3.6MP 4.3 inch HD LCD Microscope. The device stays on boot up screen.Comment
-
Comment
-
Comment
-
Comment
-
Re: Eeprom dump thread!
dump ue32c5100 for you after many searchAttached FilesComment
-
Re: Eeprom dump thread!
GOLD SKY 32 MODEL GS-3267 okComment
-
Re: Eeprom dump thread!
main -CVMV59SH-U32-20_EXT_SPI_FLASH-MX25L6445E_Goldi L32D10MComment
-
Re: Eeprom dump thread!
globevision_led_GD25Q64B chassis TP.SIS231.P63Comment
-
Re: Eeprom dump thread!
Here is the Firmware that I pulled of a replacement board BN41-02528A BN94-10804K for Samsung UE70KU6000 7-" 6 Series TV (for backup) . Its an SPI NOR flash , pulled using a CH341A Chip programmerAttached FilesLast edited by 90Ninety; 07-06-2022, 09:23 AM.Comment
-
Re: Eeprom dump thread!
Need help guys! Need dump files for TCL LED 42B2500F
Thank you in advance..
attached is the non working dumpAttached FilesNever stop LEARNING because life never stops TEACHING!Comment
Related Topics
Collapse
-
Good day to all, I have a big problem. I can't find the eeprom dump for the Eizo CS2740 monitor. The device doesn't turn on, the indicator just lights up. It responded to connecting to the PC once. The update process started with the standard program and then disconnected from the computer. The computer doesn't detect it anymore. If anyone has an eeprom dump, please share.
-
Channel: Troubleshooting Computer Displays
07-26-2025, 03:24 PM -
-
by (0)_(0)Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.
The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...02-17-2022, 09:09 PM -
by my2k2Good day to every one,
I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
Does anybody have an eeprom dump file? I really appreciate any help.
Thanks in advance.-
Channel: Troubleshooting Audio Equipment
07-01-2024, 09:04 PM -
-
P14s Gen 2
HT4B0/HP4B0/HT5B1/HT4B2
NM-D352 Rev 1.0
sn PF-35P15W
Requesting thunderbolt dump
also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work....-
Channel: BIOS Requests ONLY!
-
-
by Ancient1Hi
I was working all day on a 42" with no backlight = Driver is bad . LED Tester. Image exists
As I was reassembling, I discovered faults on the screen ( used the LED Tester to power the strips).
Right distribution board, 2 Flexs, near them:
The one near the center has 1" line on screen. Pressing on the board-side or Panel side of the Flex bonding place results in some change, I sensed heating one time, but main fault line remains
The other, pressing on the Panel to the Chassey and the lines disappears 99.99%
I... - Loading...
- No more items.
Comment