Re: Eeprom dump thread!
Need firmware file for Gocomma G600 1 - 600X 3.6MP 4.3 inch HD LCD Microscope. The device stays on boot up screen.
electroman5946
Member
Last Activity: 12-29-2024, 10:50 PM
Joined: 07-12-2012
Location: philadelphia ,P.A
-
New electronics repair tool. Strong Power supply HR-1520.
New tool I received from AliExpress. It's a mini power supply and it can also make it easy to repair shorted motherboard. Has any one heard of this?... -
Re: Vizio M70-C3, P602ui-B3, M80-C3,... Anyone fixed the main board?
It's a BGA chip problem . Reflow from back of th board.Leave a comment:
-
Re: PS4 WLOD repair (no picture) - need help.
hdmi port look pushed in . if that happens it will never work no matter how everything is soldered. The hdmi encoders dont really fail on those models like that. ive seen people try to replace the hdmi ports and leave solder bridges across the pins , dropped port to clear shorts put port back in perfect ps4 came right up. No encoder change needed.Leave a comment:
-
Re: PS4 WLOD troubleshooting
theres a small diode that powers the encoder if its gets out of place any encoder you put in will not work. If one of the filters are damaged it will cause a no signal too. The filters btween the encoder and port can even be damaged with too much heat.Leave a comment:
-
Re: Xbox One Power Supply - Orange Light & the dies when console is plugged in
you have a short MOSFET its a HEX power FET. its on the heat sink.Leave a comment:
-
Re: Eeprom dump thread!
yes it is sadly.Leave a comment:
-
Re: Eeprom dump thread!
This is the bin file for a Samsung UN32J4000 and another bin file with the mainboard its from.Leave a comment:
-
Re: Eeprom dump thread!
Here to add to this nice forum. i have the EEPROM to Magnovox/Funai 43me345v/f7Leave a comment:
No activity results to display
Leave a comment: