Vizio VO370M-C Vertical Lines

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • KoenigsTiger
    Member
    • Jan 2017
    • 25
    • Canada

    #1

    Vizio VO370M-C Vertical Lines

    Hey Everyone

    I have colored vertical lines on my LCD Vizio-oh. The sticker on the TV says 2009... They seem to alternate colors and brightness, they move on the screen, not just fixed in one spot. All inputs have the same symptoms. Sound is fine.

    About 6 months ago the screen got a bit darker, so I turned up the brightness. It worked fine till recently.

    The vertical lines showed up. Few days ago it would work for an hour then the lines appeared. The next day I turned on the TV the lines showed up right away, but after 15 min or so they were gone and TV worked for the evening. Next day lines are here to stay. I had the TV on for about an hour, no changes.

    I did a visual CAP check on power and logic board, none are popped or leaking...

    I pulled the connectors for the T-CON board. When I pull one connector from T-CON the corresponding side of the screen goes blank, vise versa for the other connector. When I pull the connector feeding the T-Con the whole screen does blank...

    I tried the compressed air over the T-Con, to cool it. I did not invert the compressed air can to have the freezing white stuff hit the board. I am not sure what part I need to spay???

    I checked the T-Con fuse continuity is good.

    Should I be checking the voltage on the T-Con somewhere??

    Would a factory reset help?


    I would really appreciate all the help!!!

    Thank you very much
    Gene
    Attached Files
    Last edited by KoenigsTiger; 01-06-2017, 05:38 PM. Reason: Sound is fine
  • petehall347
    Badcaps Legend
    • Jan 2015
    • 4423
    • United Kingdom

    #2
    Re: Vizio VO370M-C Vertical Lines

    start at u1 and work your way through if needed ...

    Comment

    • KoenigsTiger
      Member
      • Jan 2017
      • 25
      • Canada

      #3
      Re: Vizio VO370M-C Vertical Lines

      Hi Pete,

      Thank you for the lightening fast reply

      I'm just a nooby... I never fixed a TV before.

      U1 thats on the T-Con board? What should the voltage be?

      Thank you,
      Gene

      Comment

      • petehall347
        Badcaps Legend
        • Jan 2015
        • 4423
        • United Kingdom

        #4
        Re: Vizio VO370M-C Vertical Lines

        i meant cool that one first ..
        sorry i am fairly new too really .. just being logical .

        Comment

        • KoenigsTiger
          Member
          • Jan 2017
          • 25
          • Canada

          #5
          Re: Vizio VO370M-C Vertical Lines

          I see U2. Do you mean the large chip in the middle? UC1?

          The T-Con board has a blue LED on it. The LED turns on as soon as the TV is turned on, after approx 10 seconds the blue light turns off.

          What does that mean?

          Comment

          • petehall347
            Badcaps Legend
            • Jan 2015
            • 4423
            • United Kingdom

            #6
            Re: Vizio VO370M-C Vertical Lines

            big one is uc1 ...
            this could well be a different problem ..
            hopefully someone with more knowledge will turn up soon .

            Comment

            • KoenigsTiger
              Member
              • Jan 2017
              • 25
              • Canada

              #7
              Re: Vizio VO370M-C Vertical Lines

              Yep, I don't see U1.

              Comment

              • petehall347
                Badcaps Legend
                • Jan 2015
                • 4423
                • United Kingdom

                #8
                Re: Vizio VO370M-C Vertical Lines

                8 legs

                Comment

                • budm
                  Badcaps Legend
                  • Feb 2010
                  • 40746
                  • USA

                  #9
                  Re: Vizio VO370M-C Vertical Lines

                  Try having one ribbon cable between the LCD panel and the T-con board connected one at a time to see what you get on the screen, you MUST BE REAL CAREFUL when you put the cables in place.
                  I am leaning toward bad panel.
                  Never stop learning
                  Basic LCD TV and Monitor troubleshooting guides.
                  http://www.badcaps.net/forum/showthr...956#post305956

                  Voltage Regulator (LDO) testing:
                  http://www.badcaps.net/forum/showthr...999#post300999

                  Inverter testing using old CFL:
                  http://www.badcaps.net/forum/showthr...er+testing+cfl

                  Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                  http://s807.photobucket.com/user/budm/library/

                  TV Factory reset codes listing:
                  http://www.badcaps.net/forum/showthread.php?t=24809

                  Comment

                  • KoenigsTiger
                    Member
                    • Jan 2017
                    • 25
                    • Canada

                    #10
                    Re: Vizio VO370M-C Vertical Lines

                    Gotcha, thanks, I see the U1 now.

                    I tried cooling a bit, didn't make any difference. How long should I be cooling it for? I even inverted the can of compressed air to get the liquid hit it. Should I just take the whole thing outside it out side, its -22*C?

                    Comment

                    • KoenigsTiger
                      Member
                      • Jan 2017
                      • 25
                      • Canada

                      #11
                      Re: Vizio VO370M-C Vertical Lines

                      Should I be disconnecting the ribbon cables while TV is on or off?

                      I disconnected them while TV off, and the side for corresponding side goes blank.

                      Anyone know what the blue LED light is on the T-Con for?
                      Last edited by KoenigsTiger; 01-06-2017, 08:16 PM. Reason: Blue Light

                      Comment

                      • budm
                        Badcaps Legend
                        • Feb 2010
                        • 40746
                        • USA

                        #12
                        Re: Vizio VO370M-C Vertical Lines

                        TV unplugged when making pluging/unpluging the cables.
                        So with just one ribbon cable between the T-CON and the LCD panel one at a time, you do not see good clear image on half of the screen?
                        Never stop learning
                        Basic LCD TV and Monitor troubleshooting guides.
                        http://www.badcaps.net/forum/showthr...956#post305956

                        Voltage Regulator (LDO) testing:
                        http://www.badcaps.net/forum/showthr...999#post300999

                        Inverter testing using old CFL:
                        http://www.badcaps.net/forum/showthr...er+testing+cfl

                        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                        http://s807.photobucket.com/user/budm/library/

                        TV Factory reset codes listing:
                        http://www.badcaps.net/forum/showthread.php?t=24809

                        Comment

                        • KoenigsTiger
                          Member
                          • Jan 2017
                          • 25
                          • Canada

                          #13
                          Re: Vizio VO370M-C Vertical Lines

                          Oops, I had the TV plugged in, but turned OFF.

                          Ribbon cable disconnected; side of screen completely white.

                          Ribbon cable connected side, same as before.

                          Comment

                          • budm
                            Badcaps Legend
                            • Feb 2010
                            • 40746
                            • USA

                            #14
                            Re: Vizio VO370M-C Vertical Lines

                            BTW, is that the picture of your T-con board or from the web?
                            Next, test the DCV on the test points of the T-CON board, check:
                            VCOM, VGH, VGL, VCC, VCC1.8.

                            What is the designator for the LED on the T-CON board?
                            Your picture is too blur, I found board on SJ which is pretty close to your board but I do not see the SMD LED any where.
                            http://assets.shopjimmy.com/media/ca...-1565a-top.jpg
                            Last edited by budm; 01-06-2017, 08:54 PM.
                            Never stop learning
                            Basic LCD TV and Monitor troubleshooting guides.
                            http://www.badcaps.net/forum/showthr...956#post305956

                            Voltage Regulator (LDO) testing:
                            http://www.badcaps.net/forum/showthr...999#post300999

                            Inverter testing using old CFL:
                            http://www.badcaps.net/forum/showthr...er+testing+cfl

                            Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                            http://s807.photobucket.com/user/budm/library/

                            TV Factory reset codes listing:
                            http://www.badcaps.net/forum/showthread.php?t=24809

                            Comment

                            • KoenigsTiger
                              Member
                              • Jan 2017
                              • 25
                              • Canada

                              #15
                              Re: Vizio VO370M-C Vertical Lines

                              Yep, that's my actual t-Con.

                              LED designation is LD2

                              Sorry, iPhone4 quality....

                              Comment

                              • KoenigsTiger
                                Member
                                • Jan 2017
                                • 25
                                • Canada

                                #16
                                Re: Vizio VO370M-C Vertical Lines

                                Blue LED is illuminated for about 10 sec after TV is turned on.
                                Attached Files

                                Comment

                                • KoenigsTiger
                                  Member
                                  • Jan 2017
                                  • 25
                                  • Canada

                                  #17
                                  Re: Vizio VO370M-C Vertical Lines

                                  Ld2
                                  Attached Files

                                  Comment

                                  • budm
                                    Badcaps Legend
                                    • Feb 2010
                                    • 40746
                                    • USA

                                    #18
                                    Re: Vizio VO370M-C Vertical Lines

                                    OK, the board version from shopjimmy does not have the LED installed.
                                    I really do not know what the LED indicator is for.
                                    Last edited by budm; 01-06-2017, 09:06 PM.
                                    Never stop learning
                                    Basic LCD TV and Monitor troubleshooting guides.
                                    http://www.badcaps.net/forum/showthr...956#post305956

                                    Voltage Regulator (LDO) testing:
                                    http://www.badcaps.net/forum/showthr...999#post300999

                                    Inverter testing using old CFL:
                                    http://www.badcaps.net/forum/showthr...er+testing+cfl

                                    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                                    http://s807.photobucket.com/user/budm/library/

                                    TV Factory reset codes listing:
                                    http://www.badcaps.net/forum/showthread.php?t=24809

                                    Comment

                                    • KoenigsTiger
                                      Member
                                      • Jan 2017
                                      • 25
                                      • Canada

                                      #19
                                      Re: Vizio VO370M-C Vertical Lines

                                      Odd, Jimmy's T-Con is missing a bunch of parts compared to mine. Part number seems to be the same...

                                      Comment

                                      • budm
                                        Badcaps Legend
                                        • Feb 2010
                                        • 40746
                                        • USA

                                        #20
                                        Re: Vizio VO370M-C Vertical Lines

                                        That Blank PCB P/N 6870C-0247A can be stuff in many ways to make a bunch of different PCBA (PCB Assembly) for many LCD panels.
                                        The P/N of the PCBA should be some where on the board, may on the back side of the board.
                                        http://assets.shopjimmy.com/media/ca...65a-bottom.jpg
                                        Last edited by budm; 01-06-2017, 09:14 PM.
                                        Never stop learning
                                        Basic LCD TV and Monitor troubleshooting guides.
                                        http://www.badcaps.net/forum/showthr...956#post305956

                                        Voltage Regulator (LDO) testing:
                                        http://www.badcaps.net/forum/showthr...999#post300999

                                        Inverter testing using old CFL:
                                        http://www.badcaps.net/forum/showthr...er+testing+cfl

                                        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                                        http://s807.photobucket.com/user/budm/library/

                                        TV Factory reset codes listing:
                                        http://www.badcaps.net/forum/showthread.php?t=24809

                                        Comment

                                        Related Topics

                                        Collapse

                                        • Stanley1843
                                          Screen Display Vertical Multicolor Lines
                                          by Stanley1843
                                          Hello, I have a screen in where sometimes when I open it pop-up vertical multicolor lines (I would say the most of them are green). If I tun off and turn on the screen the lines dissapear or if I leave open the screen after approximately five minutes the lines gone. I measured the below voltages on the main PCB and on the T-CON board and the voltages are the same when it doesnโ€™t display the vertical lines and when it displays the vertical lines. Also, I cleaned all the connectors very good with IPA. I moved back and forth the connectors and the COF tabs but the vertical lines didn't displayed...
                                          06-29-2024, 11:54 AM
                                        • brad2157
                                          Vizio E70-E3 Two white vertical lines
                                          by brad2157
                                          I picked up a Vizio E70-E3 for free that shows Vizio logo and then goes to a black screen. Original owner said he started having wifi issues and then he tried to reset the TV and that's when it wouldn't boot up any longer after his reset attempt. I picked up a replacement main board from eBay that matches the same model # board as the original from the TV.

                                          Original main board - Shows Vizio logo when TV powers on, then goes to black screen. Doesn't boot up. No screen issues with any lines on start up Vizio logo.

                                          Replacement main board - Boots up fine, but starting...
                                          12-13-2021, 05:11 PM
                                        • howardc64
                                          Vizio M65Q7-H1 Red Vertical Strips fixed by tape blocking LC1 signal to half of the panel
                                          by howardc64
                                          Failure Symptom



                                          No picture, just red vertical stripes. Google search shows quite common problem for these recent Vizio M series although red vertical stripe pattern may differ. Some call it "Netflix" boot screen haha.

                                          Where is the short?

                                          Panel has 4x buffer boards. Quickly found the 1/4 panel buffer board with the problem by selectively disconnecting buffer board flex cables.



                                          Having recently fixed another Vizio with similar symptoms that was a shorted ESD diode array ( link ) Probed the ESD diode array but...
                                          05-27-2025, 02:56 PM
                                        • Daren87
                                          Sony 8K XBR-75Z8H White Screen Vertical Bars Tcon Code. Help Needed๐Ÿ™
                                          by Daren87
                                          Hello everyone,

                                          I've recently been given a Sony 8k Z8H. It's got a white screen with two vertical black bars. At times it's given me the 5 blink Tcon code. Testing voltage on the Tcon I can see some low or missing voltage. I've done a basic visual check of cables and the COF. Not seeing anything obvious. The original Tcon seemed to have good caps until turning it over. On the bottom I found maybe 10 caps with both sides of the caps shorting to ground. I thought ok these caps and likely other components on the Tcon are shorted so let's try a replacement Tcon. I just received the...
                                          08-13-2023, 03:25 PM
                                        • gpo23
                                          Sony KDL-40V3000 - Vertical lines
                                          by gpo23
                                          Hello,

                                          i order a t-con because i had bad colors on my SONY KDL-40V3000 :




                                          With the new t-con the color are good but there are vertical lines on all the screen :




                                          I've tried the old t-con and it returned to the initial issue (bad colors but no vertical lines)

                                          Is there a way to fix the vertical lines on the new t-con ?

                                          Thank you for your help

                                          gpo23...
                                          10-04-2023, 09:11 AM
                                        • Loading...
                                        • No more items.
                                        Working...