Re: sharp LC-32SH130K / Vestel 17PW82-2 v.1 090511
Whats the mainboard part number used in this set
Whats the mainboard part number used in this set
-
-
Re: sharp LC-32SH130K / Vestel 17PW82-2 v.1 090511
When you say main board, do you mean the one which has all the connection points e.g. SCART on it?
I'm pretty sure it's a Samsung board but I failed to take a picture of it. I guess I'll be popping back around for that info.Comment
-
Re: sharp LC-32SH130K / Vestel 17PW82-2 v.1 090511
yes sorry the one with the scart/hdmi etc on it if you can get a good picture of it and also the part number.Comment
-
Re: sharp LC-32SH130K / Vestel 17PW82-2 v.1 090511
also check reece video check the diodes like he says just incase any are giving bad readings for didode test you Dont need the set plugged in)
https://www.youtube.com/watch?v=N6Eo0BwRRJk&app=desktopComment
-
Re: sharp LC-32SH130K / Vestel 17PW82-2 v.1 090511
Thanks Vince. Symptoms seem very similar to Reece's video so will check the diodes.Comment
-
Re: sharp LC-32SH130K / Vestel 17PW82-2 v.1 090511
Maybe reece will advise us on those diodes (the top edge ones) and what voltages they provide as in your chart you have posted most are ok.Last edited by vinceroger69; 10-12-2016, 09:30 AM.Comment
-
Re: sharp LC-32SH130K / Vestel 17PW82-2 v.1 090511
You do not have BL-ON command signal from main board to turn on backlights circuit. Is it always at 0 VDC when TV is on or off?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: sharp LC-32SH130K / Vestel 17PW82-2 v.1 090511
You have main board problem.
The 18VDc is also missing so the diodes for the 18V_24VA are OK?Last edited by budm; 10-12-2016, 10:05 AM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: sharp LC-32SH130K / Vestel 17PW82-2 v.1 090511
i think budm means test the diodes as per the video reece linked if any of the diodes are bad that may cause the missing voltagesComment
-
Re: sharp LC-32SH130K / Vestel 17PW82-2 v.1 090511
Keep the mainboard unplugged, test the main connector for the Mb for the following voltages:
12v
5v
3.3v
Then test the connector going to the inverter for:
24v
If these are present with the Mb disconnected your Psu is ok if not Psu is failed.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: sharp LC-32SH130K / Vestel 17PW82-2 v.1 090511
he has posted the results reece in post 20 looks like he has bl-on missing and a 18v? the other voltages are there so probs a mainboard issue as budm advisesComment
-
Re: sharp LC-32SH130K / Vestel 17PW82-2 v.1 090511
Hmm mainboard issue then, Ive had 17MB62, 17MB60 and 17MB82 fail like this shorted Cpu due to poor heatsinking.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: sharp LC-32SH130K / Vestel 17PW82-2 v.1 090511
whats the 18v feed on these psu s or isnt it used in these sets?Comment
-
Re: sharp LC-32SH130K / Vestel 17PW82-2 v.1 090511
Vince 18v is not generally used on 32" sets with smaller size Mbs Ie MB62 etc. However on Vestels you never know what design they are going to use for a Tv lol Id expect you to know that by now
Last edited by ReeceyBurger123; 10-12-2016, 11:44 AM.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: sharp LC-32SH130K / Vestel 17PW82-2 v.1 090511
say no more being a vestel once we know what mainboard is used in this set we can try to offer some more help and advice.Comment
-
Re: sharp LC-32SH130K / Vestel 17PW82-2 v.1 090511
Thanks for all the help.
Main board is a 17MB60-4.1
The 3 diodes in circuit read 473 on my multimeter.
On looking at the caps again I'm wondering if one is slightly dome'd.
Just trying to upload pics from mobile.Attached FilesLast edited by dooosuk; 10-12-2016, 02:19 PM.Comment
-
-
Re: sharp LC-32SH130K / Vestel 17PW82-2 v.1 090511
This is a very good price for the mainboard as long as it matches with the numbers on your old one,mainboards are hard too fault find and also fail bga solder wise etc so maybe best to swop it out
http://www.ebay.co.uk/itm/SHARP-LC32...MAAOSw8gVX--sxComment
-
Hello
Model Code Sharp LC-40FG3141K
Firstly perhaps I should save myself the agony and throw this set out ? Then again I hate E-waste , or giving a person further headace in the far east or Agbogbloshie . So I digress to my last hope of fixing this pile of shite , with the dash of hope from your combined experiences
So this set is randomly turning off its backlight ( could be days, hours, minutes or seconds ) , my research suggests this maybe an over current protection , or leaky/faulty LEDS , or a bad LED driver circuit . So I opened it up , stabbed my Multi... -
Hitachi 32HAE2351 Vestel 17MB171 - Rotate Image
Mainboard: VESTEL 17MB171 Chassis: VES315WNGB - 2D - N52
The TV was stuck on the logo and I couldn't access the update menu.
I couldn't find the firmware for the Hitachi 32HAE2351 and updated it with the Toshiba 32WA2063DG - Vestel 17MB171 firmware.
The image result was good, but the image is inverted.
The image rotation/mirror function doesn't exist in the Menu Server. I can't correct the image.
Do you have the firmware for the Hitachi 32HAE2351 - Vestel 17MB171 motherboard or a solution to rotate the image in... -
Hello everyone from Italy, I'm here to ask for help on a Vestel TV, I've had a Vestel TV branded "XD" with a broken screen for years, but now I've found a Telefunken (still Vestel but older) and I've mounted the panel on the "XD" TV, it works, but the screen is upside down, given that Vestel does not allow you to rotate the image from the service menu, does anyone know how to solve the problem? the original panel is marked ves315WNDS-2D-N12 while the main board 17mb110, the panel I mounted instead in the tv (from the telefunken) is a ves315WNDA-02. ... It is not worth repairing... -
Hi, I was recently given a Bush Smart TV by a friend and the main board seems to be hanging on by a thread.
Before we get to that, my first obstacle was figuring out the model number since the back sticker has gone for a walk. Upon taking off the back case, I noticed the following Vestel parts, 17MB95m mainboard, 17IPS71 (what I'd assume is power supply) and a VES420UNVL-3D-S02 display panel. After doing some research I think the TV I have is a Bush ELED42240FHDCNTD3D, based on the matching image here (https://www.manualslib.com/manual/11...td3d.html#manu... -
Hello, board 17MB140TC, I need to change the remote control in Vestel tool box 1.1. The original is there
Rc48xx_2D and I want to install TOSHIBA-Rc481xx, but the program says that a maximum of 9 characters can be entered. I only entered Rc481xx and the program does not accept the driver I have in the original. Does anyone know how to do this? Other Vestel codes work.
I can send a dump....
Comment