Vestel main board 17MB140TC

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • hazi12
    Member
    • Jun 2015
    • 11
    • Czech Republic
    #1

    Vestel main board 17MB140TC

    Hello, board 17MB140TC, I need to change the remote control in Vestel tool box 1.1. The original is there
    Rc48xx_2D and I want to install TOSHIBA-Rc481xx, but the program says that a maximum of 9 characters can be entered. I only entered Rc481xx and the program does not accept the driver I have in the original. Does anyone know how to do this? Other Vestel codes work.
    I can send a dump.
    Attached Files
    Tags: None
    • yokoono
      Badcaps Veteran
      • Apr 2010
      • 505
      #2
      Hi. I tried to make the change too. I didn't succeed. I actually broke it worse so I gave up making such changes. The easiest thing is to rewrite the profile with one saved from the same TV model and that uses the same remote control.

      L.E.
      Try at your own risk. Delete Rc48xx_2D, type Rc481xx, Save.


      Last edited by yokoono; Today, 01:06 AM.

        Comment

        • hazi12
          Member
          • Jun 2015
          • 11
          • Czech Republic
          #3
          I tried it, but it doesn't work. Interestingly, it works with the 17MB110. I don't have the same motherboard as the 17MB140TC, which has a Toshiba remote control.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • cheeky2
              Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
              by cheeky2
              I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
              Obviously the same LVDS connector for the screen connection...
              05-25-2024, 03:27 AM
            • Dani_2024
              Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
              by Dani_2024
              Hi and thanks in advance for any input you might provide!
              I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
              Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

              Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
              5 Photos
              10-28-2024, 05:06 PM
            • ygorsan
              LG 55NANO77SRA TV ā€“ Menu scrolling by itself even after removing button board (Main Board EBU66792103)
              by ygorsan
              Hi everyone,




              Iā€™m looking for help with a persistent issue on an LG TV model 55NANO77SRA, which uses the main board EBU66792103 (also used in LG UQ80 and NANO75/NANO80 series).







              šŸ§© Problem Summary:
              • The TV keeps scrolling through the menu or selecting items by itself.
              • I removed the physical button board (the entire panel with power and volume buttons) and also disconnected the flat cable (CN202) from the main board.
              • The remote control is not in use (batteries removed), and the TV still shows the same behavior.
              • I
              ...
              07-28-2025, 08:34 AM
            • jb_Bak
              Sony xbr-65x900c main board issues?
              by jb_Bak
              Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

              Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
              Power Board Connector that goes to Main board
              CN6401
              Pin 01 NC
              Pin 02 NC
              Pin 03 "BL_ON": 0V
              Pin 04 "N/C"
              Pin 05 "STBY 3.3V": 3.5V
              Pin 06 "GND": N/C
              Pin 07 "AC_OFF"...
              09-27-2021, 04:52 PM
            • JDC
              (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
              by JDC
              ONN 100012588
              Issue: No Power, Then Rebooting After Main Board Change

              Short answer: replace main board and power board
              Technical answer: replace main board and Q306 & Q307 on power board.

              Long answer:

              TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
              07-15-2022, 07:39 AM
            • Loading...
            • No more items.
            Working...