The above tv stays on now thanks to help from some badcap members . But after the Y sus repair I am getting pixels that take a couple of seconds to go and are several different colours -please have a look at the photos I have attached.
I have run the test patterns and its evident to a degree.
I have adjusted the set up and dn without any success and all the voltages are as follows
va 55
vs 205
vy 181
vzb 135
Any help would be appreciated (I have reseated the ribbon from the main board to the tcon several times, tvs still the same)
What I found strange how the tv retains image of the tv settings menu please see last two photos
I have run the test patterns and its evident to a degree.
I have adjusted the set up and dn without any success and all the voltages are as follows
va 55
vs 205
vy 181
vzb 135
Any help would be appreciated (I have reseated the ribbon from the main board to the tcon several times, tvs still the same)
What I found strange how the tv retains image of the tv settings menu please see last two photos
Comment