Hi,
I was wondering if I could get some help with this tv.
With both connectors hooked up, I plug in power and have
5v on the connector pins marked 5v. There is no power indicator
light on. I turn the tv on with the button, and no indicator lights still.
(When I first started looking at it, I could turn it on with the remote
also and a white indicator light came on, but no more)
Now with the power on, I see 24V, 12V, 5v and 2.42V on the STB pin.
The INV ENA pin shows 0.10V and the DIM pin reads 0.05V.
If I power on with the left cable disconnected and then remove power,
when I plug that left cable back into the left board, a flash of blue
light comes from behind the perforated cover.
Is this all showing me a bad main board? What's up with that blue flash?
Thanks for any tips,
Jeff
https://drive.google.com/open?id=0B3...HJsV1dYUlVfVzg
I was wondering if I could get some help with this tv.
With both connectors hooked up, I plug in power and have
5v on the connector pins marked 5v. There is no power indicator
light on. I turn the tv on with the button, and no indicator lights still.
(When I first started looking at it, I could turn it on with the remote
also and a white indicator light came on, but no more)
Now with the power on, I see 24V, 12V, 5v and 2.42V on the STB pin.
The INV ENA pin shows 0.10V and the DIM pin reads 0.05V.
If I power on with the left cable disconnected and then remove power,
when I plug that left cable back into the left board, a flash of blue
light comes from behind the perforated cover.
Is this all showing me a bad main board? What's up with that blue flash?
Thanks for any tips,
Jeff
https://drive.google.com/open?id=0B3...HJsV1dYUlVfVzg
Comment