Panasonic Plasma TX-P50GT30B - 7 blinks

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • d261116l
    New Member
    • Apr 2016
    • 5
    • United Kingdom
    #1

    Panasonic Plasma TX-P50GT30B - 7 blinks

    My Panasonic Plasma has stopped working. On power on the green flashes fast for a few seconds then the red flashes 7 times. From reading online this is likely to be the SC board. Though it could also be SD / SU boards. Is this correct?

    Is there anyway to definitely prove it is the SC board? There are repair services for the board that cost between £70 to £100 and I don't want to waste money on it if it is not that board.

    The board part number is TNPA5335 BG. I've seen a TNPA5335 AG board on ebay that came from a TX-P50GT30B. Are the BG and AG boards compatible?

    thanks
    Tags: None
    • ReeceyBurger123
      Never Give Up !
      • May 2014
      • 7325
      • Britain
      #2
      Re: Panasonic Plasma TX-P50GT30B - 7 blinks

      You need a DMM, have you got one with diode tester mode ?
      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

      https://www.facebook.com/Telford-Tel...7894576335359/

        Comment

        • d261116l
          New Member
          • Apr 2016
          • 5
          • United Kingdom
          #3
          Re: Panasonic Plasma TX-P50GT30B - 7 blinks

          Originally posted by ReeceyBurger123
          You need a DMM, have you got one with diode tester mode ?
          Yes I have a DMM with a diode tester mode.

            Comment

            • d261116l
              New Member
              • Apr 2016
              • 5
              • United Kingdom
              #4
              Re: Panasonic Plasma TX-P50GT30B - 7 blinks

              After following the troubleshooting flowchart for 7 blinks on page 51 in the attached guide.

              I have a short circuit on Vsus. After plugging P2 and P11 on the P board. The short is only on pin1 on SC2 on SC board. And not on P or SS board.

              After removing the SC board from the plasma and testing across SC2 there is a short there. So the SC board is definitely damaged. I'm going to send the SC board away to get repaired as the soldering is beyond my skill level.

              Going by the flowchart it only points to the SC board being damaged. Is this correct? Or can the SD /SU boards be damaged aswell. Because if they caused the SC board to go, when I put back in the repaired SC board, could the SU / SD blow the SC board again?

              Is there anyway to test the SU /SD boards? And is there a certain way I power up the plasma when I replace the SC board?
              Attached Files

                Comment

                • ljintexas
                  LJinTexas
                  • Jan 2015
                  • 669
                  • USA
                  #5
                  Re: Panasonic Plasma TX-P50GT30B - 7 blinks

                  Most likely, SU or SD caused the damage to SC. Perform the test that you can find on this forum..See slide 56 in your manual.
                  Last edited by ljintexas; 04-23-2016, 08:58 AM.

                    Comment

                    • d261116l
                      New Member
                      • Apr 2016
                      • 5
                      • United Kingdom
                      #6
                      Re: Panasonic Plasma TX-P50GT30B - 7 blinks

                      Originally posted by ljintexas
                      Most likely, SU or SD caused the damage to SC. Perform the test that you can find on this forum..
                      What is the test? Is it going across each output pin from the SD / SU board and to VFG using diode test mode on DMM? I don't get any short circuits, so does this mean the SU and SD boards are good?

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • Tynan Dill
                          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                          by Tynan Dill
                          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                          Upon bringing it home and plugging it up, it showed a standby light.

                          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                          The screen seems to blackout and stay black, but with a flashlight I can see the display.

                          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                          Assuming...
                          ORIGINAL POWER SUPPLY BOARD
                          7 Photos
                          11-22-2024, 01:46 PM
                        • stecos
                          Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
                          by stecos
                          Hi everyone!
                          I happened several times, in the search for help from the web, to consult this very interesting forum.
                          So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

                          Having said that I come to the gist of my post on the forum as the title suggests.
                          For my passion for technology I'm now collecting several...
                          11-28-2022, 11:39 AM
                        • m1ch43lzm
                          HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                          by m1ch43lzm
                          Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                          Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                          05-12-2025, 08:37 PM
                        • Biruslapio
                          Panasonic P50VT20B Plasma 12 Blinks, Power Supply or A-Board?
                          by Biruslapio
                          Hello, I've had this TV for 3 years, 2 years ago it stopped working signaling 12 Blinks, SOUND_SOS according to the service manual.

                          It has no VSUS or VDAT, and P15V has 1.0V instead, the same 15V goes to A board. F15V is ok and other main voltage rails.

                          It seems the power supply is defective, since unplugging D20 ribbon cable that goes from D-board to SC-board makes the behavior change, the TV stays on, there's no image nor VSUS, but 15V reads 2.4V, high enough to not trip the SOS 12 blinks, so it stays on, fans do not spin but I left it 2 hours, green led lit up...
                          02-16-2021, 09:44 PM
                        • sam_sam_sam
                          Panasonic switching power supply daughter board has two 27uf @ 50 volt capacitors which I do not keep in stock
                          by sam_sam_sam
                          I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow

                          This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board

                          After all of...
                          07-13-2024, 08:14 PM
                        • Loading...
                        • No more items.
                        Working...