Samsung UN60EH6000F Backlight but no image.

[alfredomfr1]

To all:
This TV came with backlight but no image, after replace the T-Con board, TV is showing image but after 2 min more or less, image is gone (see the video).
T-Con replaced again, same . Firmware updated, same. main board replaced, same. cables cleaned and reseated, same.
I have 2 TV with the same problem.

[Diah]

Re: Samsung UN60EH6000F Backlight but no image.

it seam the T-CON fail again.

try to connect just one side of ribbon cable and give order menu via RC

[Nick's Tvs]

Re: Samsung UN60EH6000F Backlight but no image.

Looks like a bad panel. Most of the time when you get a shadow like that it will be a bad panel. It is possible that somehow the failure of the panel could have taken out the original T-con board. Try twisting the tv in the same way as if you were to ring out a small towel. Obviously do this softly to not damage the set further, but if that causes your issue to go away, you have a bad tab bonding.

[ReeceyBurger123]

Re: Samsung UN60EH6000F Backlight but no image.

looks like a bad panel. Most of the time when you get a shadow like that it will be a bad panel. It is possible that somehow the failure of the panel could have taken out the original t-con board. Try twisting the tv in the same way as if you were to ring out a small towel. Obviously do this softly to not damage the set further, but if that causes your issue to go away, you have a bad tab bonding.

+100000000

[ReeceyBurger123]

Re: Samsung UN60EH6000F Backlight but no image.

Panel fault not fixable, do not bother spending a penny on it.

[alfredomfr1]

Re: Samsung UN60EH6000F Backlight but no image.

Thanks guys for your help.

[RCA2000]

Re: Samsung UN60EH6000F Backlight but no image.

Give me back the ONE reliable, durable, PROVEN display device out there...the CRT !!!!!!!!

[Terryfictv]

Re: Samsung UN60EH6000F Backlight but no image.

BN95-00628C T-Con usually fixes this one.