Philips 32PFL6606H/12 problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tempro
    Member
    • Dec 2015
    • 15
    • bulgaria
    #1

    Philips 32PFL6606H/12 problem

    First of all, happy new year guys!
    So the model of my TV is Philips 32PFL6606H/12. When i turn the TV ON, it has no picture but the sound is ok. When i flash the screen with a flishlight i can see some silhouettes.If i let it work for 3 or more hours the picture appears and it works fine until i shut it down again.I haven't opened the TV or did anything to it at all yet.I red alot for problems like this but i can't seem to find anythink so i want to ask u guys.
    Thanks in advance!
    Cheers
    Tags: None
    • ReeceyBurger123
      Never Give Up !
      • May 2014
      • 7325
      • Britain
      #2
      Re: Philips 32PFL6606H/12 problem

      Checks inverter voltages ?
      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

      https://www.facebook.com/Telford-Tel...7894576335359/

        Comment

        • tempro
          Member
          • Dec 2015
          • 15
          • bulgaria
          #3
          Re: Philips 32PFL6606H/12 problem

          So i checked the voltages here(as i shown on the picture).FIrst pin should be 3.3V , fifth and sixth 12v and 13th pin 24V. When I turn the TV on all the voltages are good,but after 1min all except the first(3.3V) give me 0V.Maybe there is a problem with the power supply board ?
          Attached Files

            Comment

            • Moreno83
              Badcaps Legend
              • Jun 2014
              • 2008
              • The Netherlands
              #4
              Re: Philips 32PFL6606H/12 problem

              I think its a powersupply problem , well at least the inverter in the PS. Can you give us a close up of the PS?
              I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

                Comment

                • tempro
                  Member
                  • Dec 2015
                  • 15
                  • bulgaria
                  #5
                  Re: Philips 32PFL6606H/12 problem

                  supply
                  Attached Files
                  Last edited by tempro; 01-09-2016, 09:35 AM.

                    Comment

                    • tempro
                      Member
                      • Dec 2015
                      • 15
                      • bulgaria
                      #6
                      Re: Philips 32PFL6606H/12 problem

                      Sorry,my mistake. The TV was on stand by when i checed the voltages. When I turned it ON from the remote, all the voltages were fine! So I guess that is not the problem.What else can I check?

                        Comment

                        • Moreno83
                          Badcaps Legend
                          • Jun 2014
                          • 2008
                          • The Netherlands
                          #7
                          Re: Philips 32PFL6606H/12 problem

                          You need to search for the service manual. If you can find it then i will search for it tomorrow
                          You don't have any backlight , so either the lamps are dead or your missing the bl_turn on signal.
                          I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

                            Comment

                            • tempro
                              Member
                              • Dec 2015
                              • 15
                              • bulgaria
                              #8
                              Re: Philips 32PFL6606H/12 problem

                              I found the service manual and I am reading it now, but i don't think the lamps are the problem because after 3 hours the TV starts working fine. How can i check if i am missing the bl_turn on signal? Should i try running the TV in SMD mode so I can check the errors?

                                Comment

                                • tempro
                                  Member
                                  • Dec 2015
                                  • 15
                                  • bulgaria
                                  #9
                                  Re: Philips 32PFL6606H/12 problem

                                  So the TV was set on a stand that was screwed to the wall.When I removed the stand and set the TV on the original holder that was not on the wall it started working fine for 2-3 days and after that it started to requere 20-30 min and more to start working.It was a black screen (u can see silhouettes with a flash light) and after 20-30 min when i shut it down and on again it worked fine.And now it needs 2-3 hours untill you can see any picture and the picture is on the screen for 20 min and the TV shuts down automatically.

                                    Comment

                                    • Nwanko
                                      New Member
                                      • Sep 2019
                                      • 1
                                      • Slovenia
                                      #10
                                      Re: Philips 32PFL6606H/12 problem

                                      Hello, i have the same TV, simular issue, when i turn on the tv it shows the phillips sight for a second then the backlight turns off. I still see the picture is i shine a flashlight in the screen, alson when i turn it on and the backlight shows i hear a squicking sound and as soon as the backlight turns off the squicking is gone. What could be the problem here?! Please help!

                                        Comment

                                        Previous template Next

                                        Related Topics

                                        Collapse
                                        • courtcircuit
                                          Philips HTS8000 home cinema noise problem
                                          by courtcircuit
                                          Hello

                                          I have since a long time a Philips HTS8010S/01 which has been old but was doing the job.

                                          Since a few days, it starts by making a weird "static" nois when switches on for a few seconds to a minute and then works like a charm.
                                          Noise loudly outputs from the 3 channels, even if no signal is sent by the controler.DVD to the subwoofer/amp unit.

                                          I was thinking of a soldering that was starting to be damaged and that was only doing the job after a few seconds of heating, most probbaly on the power board
                                          Removed each of tyhe boards
                                          ...
                                          02-08-2025, 08:22 AM
                                        • theone111
                                          Problem with LG Plasma 60PM6700 - Random power downs
                                          by theone111
                                          I have an LG Plasma TV 60PM6700 for the past ~12 years.

                                          In the last ~3-4 months I have been having some issues.
                                          1. Problem: It started with random picture disappearing (sound still worked).
                                            Frequency: Happened about once a week.
                                            Solution: Had to turn off TV wait a few seconds before turning it on again.
                                          2. Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
                                            Frequency: Happened about once a week.
                                            Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve.
                                          3. Problem: TV shuts down
                                          ...
                                          1 Photo
                                          07-22-2024, 10:36 AM
                                        • bohaboha
                                          PHILIPS 32pfl3403d Flat-panel TV Upgrade Assistant problem
                                          by bohaboha
                                          Hi trying to update my Philips cause in retail mode not possible to get out from it i get this message in update site : Error message: no data exception. Your reference: Request ID (server_1930105)
                                          how to fix it thanks
                                          02-05-2025, 09:23 PM
                                        • atkallu
                                          Philips 58PUS8545 t-con problem or something else ?
                                          by atkallu
                                          Hello
                                          I have a Philips 58PUS8545 which have a vertical moving lines on screen and it is flashing white vertical lines like a every 3-4 seconds.
                                          See the attached image.

                                          I removed left side flex-cable from the t-con and then there was half screen sharp and correct image and other half was white.
                                          But when I removed the right side flex-cable then half of the screen was white but other half was white and above the white there was vertical lines on half of the screen.

                                          T-con two flex-cables have been changed to cross but nothing changed, so it is not due those...
                                          1 Photo
                                          01-13-2025, 11:23 AM
                                        • markolino
                                          Philips 65PUS6262/12 Graphic Problem Help
                                          by markolino
                                          Hi.
                                          I bought a Philips TV model: 65PUS6262/12 Used.
                                          The seller was selling it as not working well. It was almost free.
                                          I want to fix the TV in some way.

                                          Namely.. A very interesting error, but very rare.
                                          The TV turns on and works. I can go to the menu, open smart applications, etc.
                                          From the very beginning, the graphics were somewhat strange to me... I'm talking about the menu graphics, etc..
                                          When I want to start the Youtube application, there is a sound but the picture is green! no movement nothing can be seen!
                                          If I connect to any HDM input,...
                                          03-12-2023, 04:05 PM
                                        • Loading...
                                        • No more items.
                                        Working...