Re: Philips 32PFL6606H/12 problem
So the TV was set on a stand that was screwed to the wall.When I removed the stand and set the TV on the original holder that was not on the wall it started working fine for 2-3 days and after that it started to requere 20-30 min and more to start working.It was a black screen (u can see silhouettes with a flash light) and after 20-30 min when i shut it down and on again it worked fine.And now it needs 2-3 hours untill you can see any picture and the picture is on the screen for 20 min and the TV shuts down automatically.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Toshiba Satellite - Locks up when plugged in
I have tried 6- 5x330 and1x220 and again to upper case.Оf these...Last edited by tempro; 02-22-2016, 01:46 PM.
Leave a comment:
-
Re: Toshiba Satellite - Locks up when plugged in
Hello everyone.
I did a repair using scrap boards.When i start the laptop, the on light turns ON,The HD lamp just flashes and the fan in working fine.After 5 sec the lamp just turns OFF and after 2 more sec it turns ON again the fan start working again, but nothing works and there is no screen.Where can my mistake be? I have tryed that with different scrap boards and capacitors.
Thanks...
Leave a comment:
-
Re: Philips 32PFL6606H/12 problem
I found the service manual and I am reading it now, but i don't think the lamps are the problem because after 3 hours the TV starts working fine. How can i check if i am missing the bl_turn on signal? Should i try running the TV in SMD mode so I can check the errors?
Leave a comment:
-
Re: Philips 32PFL6606H/12 problem
Sorry,my mistake. The TV was on stand by when i checed the voltages. When I turned it ON from the remote, all the voltages were fine! So I guess that is not the problem.What else can I check?
Leave a comment:
-
Re: Philips 32PFL6606H/12 problem
supply...Last edited by tempro; 01-09-2016, 09:35 AM.
Leave a comment:
-
Re: Philips 32PFL6606H/12 problem
So i checked the voltages here(as i shown on the picture).FIrst pin should be 3.3V , fifth and sixth 12v and 13th pin 24V. When I turn the TV on all the voltages are good,but after 1min all except the first(3.3V) give me 0V.Maybe there is a problem with the power supply board ?...
Leave a comment:
-
Philips 32PFL6606H/12 problem
First of all, happy new year guys!
So the model of my TV is Philips 32PFL6606H/12. When i turn the TV ON, it has no picture but the sound is ok. When i flash the screen with a flishlight i can see some silhouettes.If i let it work for 3 or more hours the picture appears and it works fine until i shut it down again.I haven't opened the TV or did anything to it at all yet.I red alot for problems like this but i can't seem to find anythink so i want to ask u guys.
Thanks in advance!
Cheers
-
TV PHILIPS 32PFL66X6-no picture
TV PHILIPS 32PFL66X6 -Morning when running the screen is off, speech ima.Vizhdat silhouettes otherwise dark ekrana.Kato warm one hour maybe more time, stop it immediately and let everything normalnoLED backlight does not include or do not know what povredata.Please if anyone knows anything the question to write.Last edited by tempro; 12-15-2015, 03:33 AM.
-
Re: Toshiba Satellite - Locks up when plugged in
On 4v ESR-18. A good must be ordered once-4x 330uf low ESR capacitors like 2R5TPE330M9Last edited by tempro; 12-15-2015, 02:02 AM.
Leave a comment:
-
Re: Toshiba Satellite - Locks up when plugged in
Will try to TANT D4 SMD 680uF 4V- 4TPE680MI x2. WR2R5122-This has nothing to do soldered.Last edited by tempro; 12-15-2015, 02:06 AM.
Leave a comment:
No activity results to display
Show More
Leave a comment: