Re: LG 60PZ570T-ZB distortion
Nah--Aint got the time for that!
I just use a 60W at 450! Done in a couple of seconds then....
Nah--Aint got the time for that!
I just use a 60W at 450! Done in a couple of seconds then....
-
TELEFIX
How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
http://www.irf.com/technical-info/appnotes/an-1088.pdf
PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM! -
Re: LG 60PZ570T-ZB distortion
For more intensive stuff--A hot-table is nice to have around.
If I'm in a hurry pulling IGBTS, I flood the three pins with fresh solder then pull 'em while all three are heated. Cleaning up after is easier with the amount of leaded solder present then--Quick suck and its all ready (Oh-Err Missus!)....TELEFIX
How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
http://www.irf.com/technical-info/appnotes/an-1088.pdf
PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!Comment
-
Re: LG 60PZ570T-ZB distortion
I have a 100w solder gun here as well as a cheap one but no solder wick I had to google what solder wick was lol wish I had something to practice on here and I may of had a go at it
can you not just try and seal the cracks of the solder as I can see them plain as dayLast edited by sealover1; 05-13-2015, 07:55 AM.Comment
-
Re: LG 60PZ570T-ZB distortion
thanks newtothis I'm temped to try and seal the cracks as this guy wants £30 just to solder them for me... shame I've got this far on my own lolComment
-
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: LG 60PZ570T-ZB distortion
yeah I think so Tom66 I have found some old hard drives I have been playing with will keep an eye out for some old broken boards to play bout with I think... I just need to practiceComment
-
Re: LG 60PZ570T-ZB distortion
local guy but had chat with my mate up the road and he said he will do it for me for cake. so off to his shop late morning with cake lol :PComment
-
Re: LG 60PZ570T-ZB distortion
Thanks very much guys for your help worked a treat and all working fine again...
Blue peter badge Awarded to all that helped
Attached FilesComment
-
-
Re: LG 60PZ570T-ZB distortion
Thanks for the follow up and enjoy the TVComment
-
Re: LG 60PZ570T-ZB distortion
Ah yes, another LG P series saved!Comment
-
Hello everyone!
Please help me determine which microcontroller was in this place.
Logically, I guess that this is a ddr4 PWM memory controller and some kind of Richtek, but which one?
Thise motherboard came after another service, where they say that water got on the controller and it burned down and they dismantled it.
They did not take photos before the intervention
The DANJLFMBAB0 REV B board, schematics, boards and photos of the motherboard were not found on the network, but I may have searched badly-((
Maybe someone has a photo of this piece,... -
Hi all, i'm asking all to reduce photos to a more comfortable resolution before post, the better like around 2000x2000, otherwise many PC / Tablets / phones refuses often to load them or has strong defection... today's digital cameras integrated in phones especially are a mockery because them saves photos at enormous resolutions with much less the real definition, so reducing them is only a good deal.. THANKS!!...
-
I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.
For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).
https://www.badcaps.net/filedata/fetch?id=3591771
https://www.badcaps.net/filedata/fetch?id=3591772
It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:
https://www.badcaps.net/filedata/fetch?id=359177... -
Hello.
Have this old Asus X58c that have some distortion on output of ALC660 sound ic. distortion is in SPK and Headphone.
i dont have spare ic, but it looks like a bad ic. have anybody some experience with this error? -
Hi all,
Because of two bright spots and a couple of dark spots I decided to replace the backlights in my Samsung UE48JU7000. See attached photos:
I thought all went well, but after full assembly and testing it out it turns out not all is fine. The backlights are completely fine but I have some weird issues on the right half of the screen. Since I didn't really touch the T-CON board (apart from taking out the ribbons of the display and reconnecting them on assembly) it would be weird that the issue is with the T-CON board... But based on the behavior of the service...
Comment