Just picked this one up, preliminary problems is dead on arrival, nothing when I try to power up. Anyone have experience with these that can provide some tips? Thanks
-
-
Re: Panasonic Viera TC-L42D2 help
Fuses?
Pictures of boards?
Please update your profile with country and mains voltage.Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740
-
Hello guys,
I have this TV that has a large or stretched image as you can see in the following video.
Is the first time I see this problem.
At first I thought there was a configuration problem in the user menu, but it's not.
I need your sage advice to fix this problem.
I have my doubts about the main board firmware or bad panel.
But I want to know what repair tips you guys give me.
Best regards.... -
My Panasonic Viera TX-P42S21B 42" 1080p HD Plasma developed a fault a few days ago.
It looks like it's going to come on, makes that click sound but then goes off. Doesn't turn on via remote.
So, obviously it's likely one or more of the components/boards. I donβt see any results for my model or a service manual anywhere, but Iβve briefly looked into it with similar models and apparently it is the SC and or SM board(s.)
How accurate are the fault blink codes? I donβt see any glaringly obvious damage on the SC/SM boards but the power supply has some markings.... -
Hi guys,
I have this Panasonic plasma tv which exhibit a no standby led. I read through a few posts and even bought a new A board from eBay and the set still has no standby light. I am measuring standby voltage of 4.99vdc at P6 pin 6 on the P board. Any help will be appreciated.
Photos attached.
Thanks in advance... -
Hi everyone!
I happened several times, in the search for help from the web, to consult this very interesting forum.
So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.
Having said that I come to the gist of my post on the forum as the title suggests.
For my passion for technology I'm now collecting several... -
In the Panasonic service manuals, both in the board schematics and in the part listing, the part numbers that are given are Panasonic part numbers instead of the actual part numbers.
This is especially annoying for small SMD components like diodes and transistors when you only have 1-3 digits printed on the component body.
For an example, look at the attached PDF.
Do you have a way to cross reference the Panasonic part number with the actual part number?
Thanks....07-03-2023, 08:16 PM
Comment