power flickerd today and now the set doesn't power.The red led isn't lighting and no relay clicking when i plug it in.I don't see any visual issues on the psu(B159-201). The set did this once before and after a few hours passed with power cord unplugged it worked again. I've read threw the forum and seen mention of the TCZAA6755U IC ref (U203) going bad. Anyone willing to walk a newbie threw some testing to attempt repair. Thanks in advance.
Announcement
Collapse
No announcement yet.
panasonic tc-p42x5
Collapse
X
-
Re: panasonic tc-p42x5
Originally posted by lrr250r View Postpower flickerd today and now the set doesn't power.The red led isn't lighting and no relay clicking when i plug it in.I don't see any visual issues on the psu(B159-201). The set did this once before and after a few hours passed with power cord unplugged it worked again. I've read threw the forum and seen mention of the TCZAA6755U IC ref (U203) going bad. Anyone willing to walk a newbie threw some testing to attempt repair. Thanks in advance.
-
Re: panasonic tc-p42x5
check anything labeled F on your power supply board, F for fuse, with a digital multimeter, be careful working with powersupplys, HIGH VOLTAGE. a pic. with more detail would be good, my camera only has 5mp, I can't get a decent pic., must need 8 or more mp for good clear pics., I guess.
Comment
-
Re: panasonic tc-p42x5
check fuses in diode mode, should read 000 or close to it, ol or no change of reading is probably bad fuse.Last edited by nomoresonys; 12-17-2014, 04:12 AM.
Comment
-
Re: panasonic tc-p42x5
I'll post better pics of the board in a bit. Charging camera.
@nomoresonys...i only seen the one big white fuse and it meters fine. I'll double check for another fuse.
@tw2005 trying to rule out any other issues. All of the links i've found for the replacement part are locatedin the uk. Any thoughts on where i can get my hands on it state side.
Comment
-
Re: panasonic tc-p42x5
Originally posted by lrr250r View PostI'll post better pics of the board in a bit. Charging camera.
@nomoresonys...i only seen the one big white fuse and it meters fine. I'll double check for another fuse.
@tw2005 trying to rule out any other issues. All of the links i've found for the replacement part are locatedin the uk. Any thoughts on where i can get my hands on it state side.
Comment
-
Re: panasonic tc-p42x5
maybe grab a manual, tom66 has his manual link stuck on his posts, and see if all your voltages at the connectors on your power supply are correct, some might require using the ac setting and some should be dc setting, maybe someone here has worked with this same model.
Comment
-
Re: panasonic tc-p42x5
No programming necessary. Try reading the part # off the IC directly with a magnifying scope. Should be fairly cheap from digikey/eBay...Last edited by tom66; 12-17-2014, 03:35 PM.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Comment
-
Re: panasonic tc-p42x5
Shouldn't matter. Probably a lead free termination style, not important for someone hand soldering.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Comment
-
Re: panasonic tc-p42x5
Pretty crook when a part is no longer available on a 2012 TV but dug this up. They have it listed with it's real number.
FAN6755UWM which would make it FAN6755UW , you should be able to get it from here.
http://panasonic.encompass.com/item/.../FAN6755UWM/Ic
Comment
-
Re: panasonic tc-p42x5
tom66 i had my eye on these earlier today. Do you think they will work ?
http://www.ebay.com/itm/171364799349...%3AMEBIDX%3AIT
Comment
Comment