panasonic tc-p42x5

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lrr250r
    Member
    • Sep 2012
    • 45
    • united states

    #1

    panasonic tc-p42x5

    power flickerd today and now the set doesn't power.The red led isn't lighting and no relay clicking when i plug it in.I don't see any visual issues on the psu(B159-201). The set did this once before and after a few hours passed with power cord unplugged it worked again. I've read threw the forum and seen mention of the TCZAA6755U IC ref (U203) going bad. Anyone willing to walk a newbie threw some testing to attempt repair. Thanks in advance.
    Attached Files
  • tw2005
    Badcaps Legend
    • Oct 2011
    • 6458
    • Australia

    #2
    Re: panasonic tc-p42x5

    Originally posted by lrr250r
    power flickerd today and now the set doesn't power.The red led isn't lighting and no relay clicking when i plug it in.I don't see any visual issues on the psu(B159-201). The set did this once before and after a few hours passed with power cord unplugged it worked again. I've read threw the forum and seen mention of the TCZAA6755U IC ref (U203) going bad. Anyone willing to walk a newbie threw some testing to attempt repair. Thanks in advance.
    Why not just get the IC and give it a go. Sounds like the symptoms, nil power after outage. Can't talk from experience though,

    Comment

    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12123
      • U.S.

      #3
      Re: panasonic tc-p42x5

      check anything labeled F on your power supply board, F for fuse, with a digital multimeter, be careful working with powersupplys, HIGH VOLTAGE. a pic. with more detail would be good, my camera only has 5mp, I can't get a decent pic., must need 8 or more mp for good clear pics., I guess.

      Comment

      • nomoresonys
        Badcaps Legend
        • Jan 2013
        • 12123
        • U.S.

        #4
        Re: panasonic tc-p42x5

        check fuses in diode mode, should read 000 or close to it, ol or no change of reading is probably bad fuse.
        Last edited by nomoresonys; 12-17-2014, 04:12 AM.

        Comment

        • lrr250r
          Member
          • Sep 2012
          • 45
          • united states

          #5
          Re: panasonic tc-p42x5

          I'll post better pics of the board in a bit. Charging camera.

          @nomoresonys...i only seen the one big white fuse and it meters fine. I'll double check for another fuse.

          @tw2005 trying to rule out any other issues. All of the links i've found for the replacement part are locatedin the uk. Any thoughts on where i can get my hands on it state side.

          Comment

          • nomoresonys
            Badcaps Legend
            • Jan 2013
            • 12123
            • U.S.

            #6
            Re: panasonic tc-p42x5

            Originally posted by lrr250r
            I'll post better pics of the board in a bit. Charging camera.

            @nomoresonys...i only seen the one big white fuse and it meters fine. I'll double check for another fuse.

            @tw2005 trying to rule out any other issues. All of the links i've found for the replacement part are locatedin the uk. Any thoughts on where i can get my hands on it state side.
            check digikey maybe.

            Comment

            • lrr250r
              Member
              • Sep 2012
              • 45
              • united states

              #7
              Re: panasonic tc-p42x5

              i'll have a look......didnt see anything on mouser. Does anything have to be programmed to it ?

              Comment

              • nomoresonys
                Badcaps Legend
                • Jan 2013
                • 12123
                • U.S.

                #8
                Re: panasonic tc-p42x5

                maybe grab a manual, tom66 has his manual link stuck on his posts, and see if all your voltages at the connectors on your power supply are correct, some might require using the ac setting and some should be dc setting, maybe someone here has worked with this same model.

                Comment

                • lrr250r
                  Member
                  • Sep 2012
                  • 45
                  • united states

                  #9
                  Re: panasonic tc-p42x5

                  don't see part TCZAA6755U on digikey either. Can someone provide an alternative part number for that ic ?

                  Comment

                  • nomoresonys
                    Badcaps Legend
                    • Jan 2013
                    • 12123
                    • U.S.

                    #10
                    Re: panasonic tc-p42x5

                    Originally posted by lrr250r
                    i'll have a look......didnt see anything on mouser. Does anything have to be programmed to it ?
                    good question, I don't know much about ic's, better let the more experienced guys advise.

                    Comment

                    • tom66
                      EVs Rule
                      • Apr 2011
                      • 32560
                      • UK

                      #11
                      Re: panasonic tc-p42x5

                      No programming necessary. Try reading the part # off the IC directly with a magnifying scope. Should be fairly cheap from digikey/eBay...
                      Last edited by tom66; 12-17-2014, 03:35 PM.
                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                      Comment

                      • tw2005
                        Badcaps Legend
                        • Oct 2011
                        • 6458
                        • Australia

                        #12
                        Re: panasonic tc-p42x5

                        Only thing I'm unsure is which version it is , U, UW?
                        Attached Files
                        Last edited by tw2005; 12-17-2014, 03:37 PM.

                        Comment

                        • tom66
                          EVs Rule
                          • Apr 2011
                          • 32560
                          • UK

                          #13
                          Re: panasonic tc-p42x5

                          Shouldn't matter. Probably a lead free termination style, not important for someone hand soldering.
                          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                          Comment

                          • tw2005
                            Badcaps Legend
                            • Oct 2011
                            • 6458
                            • Australia

                            #14
                            Re: panasonic tc-p42x5

                            Pretty crook when a part is no longer available on a 2012 TV but dug this up. They have it listed with it's real number.

                            FAN6755UWM which would make it FAN6755UW , you should be able to get it from here.

                            http://panasonic.encompass.com/item/.../FAN6755UWM/Ic

                            Comment

                            • tom66
                              EVs Rule
                              • Apr 2011
                              • 32560
                              • UK

                              #15
                              Re: panasonic tc-p42x5

                              http://www.ebay.co.uk/itm/2Pcs-Green...item27d7a172f1 ...?
                              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                              Comment

                              • lrr250r
                                Member
                                • Sep 2012
                                • 45
                                • united states

                                #16
                                Re: panasonic tc-p42x5

                                tom66 i had my eye on these earlier today. Do you think they will work ?

                                http://www.ebay.com/itm/171364799349...%3AMEBIDX%3AIT

                                Comment

                                • lrr250r
                                  Member
                                  • Sep 2012
                                  • 45
                                  • united states

                                  #17
                                  Re: panasonic tc-p42x5

                                  getting a server error when i try to upload the better pics....will try again later

                                  Comment

                                  • lrr250r
                                    Member
                                    • Sep 2012
                                    • 45
                                    • united states

                                    #18
                                    Re: panasonic tc-p42x5

                                    Better pictures of board. Back of the psu has some discoloration. Looks to be from heat. Is that normal ?
                                    Attached Files

                                    Comment

                                    • lrr250r
                                      Member
                                      • Sep 2012
                                      • 45
                                      • united states

                                      #19
                                      Re: panasonic tc-p42x5

                                      ic at location u203 replaced. Tv is now back from the dead. Thanks all
                                      Attached Files

                                      Comment

                                      • tw2005
                                        Badcaps Legend
                                        • Oct 2011
                                        • 6458
                                        • Australia

                                        #20
                                        Re: panasonic tc-p42x5

                                        Originally posted by lrr250r
                                        ic at location u203 replaced. Tv is now back from the dead. Thanks all
                                        Cool, that was easy

                                        Merry christmas to all

                                        Comment

                                        Related Topics

                                        Collapse

                                        • Andre Gilbert
                                          Panasonic TC-P55ST50 8 blinks then no blinks
                                          by Andre Gilbert
                                          Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
                                          Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.

                                          TV Model: Panasonic TC-P55ST50
                                          ...
                                          11-20-2024, 08:52 PM
                                        • AquaMan Ua
                                          Problem with PANASONIC CF53 laptop after changing BIOS settings
                                          by AquaMan Ua
                                          Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...
                                          05-17-2025, 09:40 AM
                                        • stecos
                                          Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
                                          by stecos
                                          Hi everyone!
                                          I happened several times, in the search for help from the web, to consult this very interesting forum.
                                          So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

                                          Having said that I come to the gist of my post on the forum as the title suggests.
                                          For my passion for technology I'm now collecting several...
                                          11-28-2022, 11:39 AM
                                        • aa10aa10
                                          Panasonic Toughbook CF-33 mk1 BIOS repair
                                          by aa10aa10
                                          Good day,

                                          I have tried to remove BIOS supervisor password from Panasonic Toughbook CF-33 mk1. Model number CF-33AENABTG, unfortunately I don't have any other info.

                                          I read the BIOS using afuwin, edited it and tried to flash new edited BIOS using afuwin. Unsuccessfully. Afuwin showed "Error: Problem erasing flash." starting with 0x00040000 and stoped. Then I tried many other options to flash BIOS from Windows without any luck. Finally i rebooted the device - and no post. Afterwards I have read the corrupted bios chip (MX25L12873F) using EZP2010 programmer....
                                          01-21-2025, 06:13 AM
                                        • Mnawar27
                                          Panasonic CF-H2AU24EF3 bios locked
                                          by Mnawar27
                                          Hello ,my Panasonic CF-H2AU24EF3 I get bios password locked after factory reset, can't enter bios
                                          I need help to remove it,
                                          thankyou all.

                                          Panasonic CF-H2AU24EF3
                                          SN; 2FKCA26876...
                                          11-16-2024, 08:00 AM
                                        • Loading...
                                        • No more items.
                                        Working...