Funai lc320em1f

[newtothis2]

Hello I have a Funai lc320em1f power comes on then right to stand by.
I be leave these boards are used by a few deferent sets.

[KevinCro]

Re: Funai lc320em1f

You will need to post more information. Have you looked at the boards for any bad caps or fuses? It sounds like the power supply is sensing a fault and shutting the system down. Can you take a picture of the back of the tv without the cover so that we can see the board layout?

[Ltank]

Re: Funai lc320em1f

Check power Mosfet for short.

[budm]

Re: Funai lc320em1f

See if this service manual is close to what you have:
http://elektrotanya.com/?q=showresul...oria=&kat2=all
It is one of those bad designed two-transistor switcher power supply.
Boards are pretty cheap:
http://www.shopjimmy.com/catalogsear...t/?q=lc320em1f

[newtothis2]

Re: Funai lc320em1f

I checked for bad caps didn't see any.
The power board is
Ba94f0f0102 6_a
I don't know what a mosfit is.

[RJARRRPCGP]

Re: Funai lc320em1f

Sounds like the mainboard can't detect a signal, to me. I dunno.

[newtothis2]

Re: Funai lc320em1f

If I can just replace one of the boards for cheap.
Just send me a link, please. Witch board is the problem?.

[MagicSmoke]

Re: Funai lc320em1f

It looks to me like PSU and input board is combined and the digital main is a separate board as is the inverter board. So at least 3 different boards that could be bad.

Without pics and some basic info about what voltages you have on the PSU, It will be difficult to narrow down which one is faulty.

There are some video's on utube to help understand basic tests on PSU and the inverter board.

Warning!!!! There can be over 200v on the PSU and 400v or more on inverter when operating. I would advise to be very careful if/when testing.

Edit..budm has a few links in his signature that give good instructions on what to test.

[budm]

Re: Funai lc320em1f

Please look at your boards to see which one that matches the one on shopjimmy link I post in post #4 so I can see which exact boards you have in your TV.

[newtothis2]

Re: Funai lc320em1f

I didn't see my board.
A01ftmpw a
On the sticker.

[nomoresonys]

Re: Funai lc320em1f

If I can just replace one of the boards for cheap.
Just send me a link, please. Witch board is the problem?.

ok, one second please, let me get out my crystal ball.

[budm]

Re: Funai lc320em1f

How about pictures of YOUR boards including the sticker pictures?

[newtothis2]

Re: Funai lc320em1f

I've been trying to. Not going well.
Iphone5s
Will get er done.

[newtothis2]

Re: Funai lc320em1f

This is the closest I've found.
http://www.shopjimmy.com/emerson-syl...1-main-cba.htm
But it day's this.
LC320EM1 SN beginning with DS1 or DS5 LC320EM1F SN beginning with DS1 or DS2 or LC320SL1 SN beginning with DS2. Sticker number may vary.
And mine starts with. Rs1

[newtothis2]

Re: Funai lc320em1f

Will the above board work?.

[kevinjo]

Re: Funai lc320em1f

Funai boards are...FUN? Sorry, bad joke. I have found that most of them as was posted before are mosfets ( black things with 3 legs ). Put your mutimeter on diode and check all the way around for short or open. Also Funais have solder issues. Resolder all the big diodes. Those are the 2 biggest issues and once in a while you will find a bad zener but hope that doesn't happen as they are harder to find. I also had a few mains go on them but not as much as the other things mentioned. Good luck.

[newtothis2]

Re: Funai lc320em1f

I can't get pictures uploaded.
Here are the specs.
Funia lc320em1f
Sn-rs1a1028100261
Power board-a01ftmpw a
Other board-a01ftmiv

I just need a link to the power board
I can't seem to find it thanks.

[MagicSmoke]

Re: Funai lc320em1f

Your PSU and mainboard should have a P/N like this..BA94F0F0102 6_A
or something like it. That is the # to search for.

I found at least 2 on ebay. Here is one... http://www.ebay.com/itm/Emerson-LC32...-/261440550311

These are a pain to fix. I have one here that I have replaced zeners, resistors, diodes and mosfet and it still doesn't output any stable voltages.

When uploading pics you have to wait for it to complete, it is not instant. It takes at least 30-50 seconds for each of my pics to upload.

[Shane711]

Re: Funai lc320em1f

I have another TV where someone else worked on it and left me a mess. So the Emerson LC320EM1f had missing parts. I can't find what diode goes in location D609. Looking at the schematic it seems it has no value anyway I can't find a value for it. Board number BA94F0F0102 6_A. I even have another board and I removed the diode from it but there is nothing printed on it. I need help please?

[budm]

Re: Funai lc320em1f

Where is the schematic?