Announcement

Collapse
No announcement yet.

Panasonic TX-L42ET5B - how to change language?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    What kind of violation? I don't know, but I was warned I was not allowed to send files .bin.
    Lotas, if you send me your e-mail address I will send you the dump and you can give it here on the site then. I will be glad.

    Comment


      #22
      This is not possible in “bin”, but you can pack it in zip or winrar, or send it to me in a private message, I'll post it here.

      Comment


        #23
        I wanted to send it to you in private message, but for me there is no possibility to add any attachment there, only the URL link. I am sorry, I do not want to communicate with you more. Have a good time.

        Comment


          #24
          Lotas maybe we are the only crutch of the forum.. sad..

          Comment


            #25
            You are allowed to post the file here no problem. that's what the forum is all about.
            User submitted datasheet, schematic, boardview, service manual, firmware, bios, & software.

            Comment


              #26
              So, here is the dump for the European version of TX-L42ET5E:
              Attached Files

              Comment


                #27
                From service manual:
                5 Technical Descriptions
                5.1. Specification of KEY for DTCP-IP, WMDRM and Widevine
                5.1.1. General information:
                1. EEPROM (IC8902) for spare parts has the seed of KEY for each DTCP-IP for DLNA, WMDRM for Netflix and Widevine for
                CinemaNow.
                2. The final KEY data will be generated by Peaks IC (IC8000) when SELF CHECK was done and are stored in both Peaks IC
                (IC8000) and EEPROM (IC8902).
                5.1.2. Replacement of ICs:
                When Peaks IC is replaced, EEPROM should be also replaced with new one the same time.
                When EEPROM is replaced, Peaks IC is not necessary to be replaced the same time.
                After the replacement of IC, SELF CHECK should be done to generate the final KEY data.
                How to SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote control for
                more than 3 seconds.
                TV will be forced to the factory shipment setting after this SELF CHECK.

                Comment


                  #28
                  Thanks for coming back and posting Milha, our users really appreciate it
                  User submitted datasheet, schematic, boardview, service manual, firmware, bios, & software.

                  Comment


                    #29
                    No need to thank. I am glad, that I could also help.

                    Comment


                      #30
                      That's all. I thank to everyone for help. Good luck!

                      Comment

                      Working...