milha
Member
Last Activity: 12-01-2024, 12:52 PM
Joined: 06-08-2012
Location: Brno
-
That's all. I thank to everyone for help. Good luck! -
No need to thank. I am glad, that I could also help.Leave a comment:
-
From service manual:
5 Technical Descriptions
5.1. Specification of KEY for DTCP-IP, WMDRM and Widevine
5.1.1. General information:
1. EEPROM (IC8902) for spare parts has the seed of KEY for each DTCP-IP for DLNA, WMDRM for Netflix and Widevine for
CinemaNow.
2. The final KEY data will be generated by Peaks IC (IC8000) when SELF CHECK was done and are stored in both Peaks IC
(IC8000) and EEPROM (IC8902).
5.1.2. Replacement of ICs:
When Peaks IC is replaced, EEPROM should be also replaced with new one the same time.
When EEPROM is replaced,...Leave a comment:
-
So, here is the dump for the European version of TX-L42ET5E:...Leave a comment:
-
I wanted to send it to you in private message, but for me there is no possibility to add any attachment there, only the URL link. I am sorry, I do not want to communicate with you more. Have a good time.Leave a comment:
-
What kind of violation? I don't know, but I was warned I was not allowed to send files .bin.
Lotas, if you send me your e-mail address I will send you the dump and you can give it here on the site then. I will be glad.Leave a comment:
-
I don't want to break the forum rules. I do not want to have trouble with the admin.Leave a comment:
-
I am sorry, I tried to give here the dump for the Europe version, but I was written: " You are not allowed to uplowed the file of extension .bin"...Leave a comment:
-
I programmed a new EEPROM. Then I soldered it onto the board. Then I inserted the board to the TV. After the switch on I was asked for the first set up - choosing of the language, region etc. There was needed to do nothing more in service menu.Leave a comment:
-
Hello! My name is Miloslav.
Formerly I had worked as a technician by a company producing TV sets. Now I have been retired for a couple of years. Electronics, especially TVs, are my hobby.Leave a comment:
-
It worked immediately, without service menu reset.Leave a comment:
-
I did it, how you had advised me. I downloaded the contents of the EEPROM on the Europe board and then uploaded it into the EEPROM on the English board. It worked. You were right. I am happy now. My TV is working properly - it has full menu and all the function. Thank you very much. Have a good time!Leave a comment:
-
Yes, I am going to try it. I'll let you know.Leave a comment:
-
There is only one EEPROM on the board. It is 24C64F....Leave a comment:
-
There are SPI, NAND and DDR memories on this board. You are only speaking about SPI memory. Yes, I have the sop8 clip and I could download the dates from that SPI memory on original board and write to another one. But I think, it would be useless. There are only the personal settings in this memory, not software. I will wait for opinion of other technicians for now. Thank you.Leave a comment:
-
I have here one mechanically damaged original board type E. I wanted to swap some of the memories, but I was said it is not possible, because all the memories are associated vith the processor. They must have the same numbers written in them. The numbers would have to be changed, but I am not able to do it.Leave a comment:
-
Panasonic TX-L42ET5B - how to change language?
Hello! I have exchanged the mainboard TNPH0993 in my TV Panasonic TX-L42ET5E (E like Europe) for the same board which comes from TV TX-L42ET5B (B like Britain). The TV works properly, but in menu is missing the possibility to set the language and the region of use. I tried to set it in the service menu, but there it isn't possible either. In the end I upgraded firmware on the newest version for Europe models and expected it to help, but it didn't. The two items in the menu are still missing. So my question is: " How can I set this board from Britain TV model to the Europe model?" I think... -
Re: Receiver Marantz SR5200 - Factory reset
Thanks, but it does not work. However I have already found out. It is needed to press simultaneously the button A/D and DIMER for more then 3 seconds.Leave a comment:
-
Receiver Marantz SR5200 - Factory reset
Hello boys! I have the receiver Marantz SR5200. Could somebody tell me please how to make reser to the FACTORY? Thank you for reply. Miloslav -
Re: TV Samsung UE48H6470-only 3 countries in setting
I have now 15 countries in the table. I have changed item "Local Set" in the service menu. (Option - Local Set). I have set EU_Poland.Last edited by milha; 04-17-2021, 06:21 AM.Leave a comment:
No activity results to display
Leave a comment: