Picture 'Hanging' high contrast

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Yingus
    Member
    • Apr 2014
    • 12
    • England

    #1

    Picture 'Hanging' high contrast

    Hi, I have a 32 inch Sony LCD and recently the picture has seemed a little too bright on light scenes and a little too dark on dark scenes, Also if a still picture or text has been on the screen for a few seconds then you can still see it if you change channel. I am posting a picture with the fault. I have looked around but can't find much info but i assume it will be there TCON/LVDS board or the panel at fault, any info would be very much appreciated, Thank you.

    Ignore the wavy lines, That's just the camera picking them up.

  • Th3_uN1Qu3
    Believe in
    • Jul 2010
    • 6031
    • Romania

    #2
    Re: Picture 'Hanging' high contrast

    Tcon most definitely. One of the voltages required to drive the panel (most likely VGH or VGL) has gone missing.
    Originally posted by PeteS in CA
    Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
    A working TV? How boring!

    Comment

    • budm
      Badcaps Legend
      • Feb 2010
      • 40746
      • USA

      #3
      Re: Picture 'Hanging' high contrast

      Show us the pictures of the T-CON board.
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

      Comment

      • Yingus
        Member
        • Apr 2014
        • 12
        • England

        #4
        Re: Picture 'Hanging' high contrast

        Got almost all of the board on the picture, Hope this helps.

        Comment

        • Shinju
          Badcaps Legend
          • Mar 2014
          • 1239
          • USA

          #5
          Re: Picture 'Hanging' high contrast

          Seems to but cut off on the sides, is that the whole board?

          Comment

          • budm
            Badcaps Legend
            • Feb 2010
            • 40746
            • USA

            #6
            Re: Picture 'Hanging' high contrast

            Check those test points VGMA 1~XX DC voltages.
            Never stop learning
            Basic LCD TV and Monitor troubleshooting guides.
            http://www.badcaps.net/forum/showthr...956#post305956

            Voltage Regulator (LDO) testing:
            http://www.badcaps.net/forum/showthr...999#post300999

            Inverter testing using old CFL:
            http://www.badcaps.net/forum/showthr...er+testing+cfl

            Tear down pictures : Hit the ">" Show Albums and stories" on the left side
            http://s807.photobucket.com/user/budm/library/

            TV Factory reset codes listing:
            http://www.badcaps.net/forum/showthread.php?t=24809

            Comment

            • Yingus
              Member
              • Apr 2014
              • 12
              • England

              #7
              Re: Picture 'Hanging' high contrast

              I'm assuming you mean the VGAMA points on the top right of the picture.

              @Shinju there's hardly anything else to see at the sides so thought i would just get a closer look at the board instead.

              Comment

              • Yingus
                Member
                • Apr 2014
                • 12
                • England

                #8
                Re: Picture 'Hanging' high contrast

                Top left i meant...

                Comment

                • budm
                  Badcaps Legend
                  • Feb 2010
                  • 40746
                  • USA

                  #9
                  Re: Picture 'Hanging' high contrast

                  Yes.
                  Never stop learning
                  Basic LCD TV and Monitor troubleshooting guides.
                  http://www.badcaps.net/forum/showthr...956#post305956

                  Voltage Regulator (LDO) testing:
                  http://www.badcaps.net/forum/showthr...999#post300999

                  Inverter testing using old CFL:
                  http://www.badcaps.net/forum/showthr...er+testing+cfl

                  Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                  http://s807.photobucket.com/user/budm/library/

                  TV Factory reset codes listing:
                  http://www.badcaps.net/forum/showthread.php?t=24809

                  Comment

                  • Yingus
                    Member
                    • Apr 2014
                    • 12
                    • England

                    #10
                    Re: Picture 'Hanging' high contrast

                    OK, The readings are:
                    1 - 4.69
                    2 - 4.84
                    6 - 6.98
                    9 - 7.56
                    11 - 8.16
                    12 - 6.21
                    14 - 7.09
                    17 - 4.20
                    22 - 0.34

                    Hope that helps.

                    Comment

                    • tom66
                      EVs Rule
                      • Apr 2011
                      • 32560
                      • UK

                      #11
                      Re: Picture 'Hanging' high contrast

                      It is bad, another AS15 fault...!
                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                      Comment

                      • Yingus
                        Member
                        • Apr 2014
                        • 12
                        • England

                        #12
                        Re: Picture 'Hanging' high contrast

                        Thank you kindly for all the comments, Although i already know a little bit about electronics and i love to tinker i have only just started to mess with Tv's so it's very much appreciated of you guys.

                        Comment

                        Related Topics

                        Collapse

                        • Tr0ll
                          T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
                          by Tr0ll
                          Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

                          The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

                          Original T-con:
                          Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

                          First replacement T-con:

                          I thought it might be t-con and ordered new t-con from china(supposedly tested)...
                          10-07-2023, 07:48 PM
                        • JJAAMM
                          SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
                          by JJAAMM
                          This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

                          Problem
                          TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
                          07-06-2023, 06:01 AM
                        • cloo
                          Panasonic ZT60 plasma tv with strange behavior and 8 blink code
                          by cloo
                          I recently got my hands on a 60" Panasonic P60ZT60 plasma tv (european model) that has some strange issues along with an 8 blink code.
                          It know this tv is getting old but it was once considered one of the best plasmas ever made, and i think it is still holds on to that even by todays standards.


                          So, long story short. When i first got the tv it had a very bright washed out picture with very raised blacks in all picture modes and i couldn't find the cause in the picture setting menus.
                          After doing a factory reset this problem was gone and the picture was back to...
                          01-06-2025, 06:02 AM
                        • TR103
                          Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
                          by TR103
                          Hi, I have a Samsung UE50TU with:
                          - sound and backlight, but no picture
                          - when it arrived, it had a picture for a few seconds
                          - it keeps rebooting
                          - without ribbon cable between the two panel boards, it does not reboot but I have no picture
                          - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
                          - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

                          - without cable between mainboard and lcd panel and with a jumpered...
                          01-22-2025, 04:12 PM
                        • MikeRWK
                          Sharp LC-32D40U Negative picture unless the contrast is almost 0
                          by MikeRWK
                          This only affects the picture but not the tv menus. Selecting any of the default picture settings gives a negative picture but turning the contrast down to 5 'fixes' it but then the tv is too dim which is hard to tell in the pictures.

                          This tv has a main board, scaler board, and a tcon.

                          I tore it down so I could probe the tcon which is nicely labelled. I've also included a pic of it.Here are the voltages I got:

                          VGH 32V
                          VGL -6V
                          GAM1 14.6V
                          GAM18 185mV
                          VLS 14.67V
                          3V 3.01V
                          RESET 2.95V
                          TCLK 0V
                          SCC_VDD...
                          01-30-2021, 05:21 PM
                        • Loading...
                        • No more items.
                        Working...