Vizio E472VLE vs VIZIO E3D470VX LCD SCREEN

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ecking767
    Badcaps Veteran
    • Oct 2009
    • 492
    • USA
    #1

    Vizio E472VLE vs VIZIO E3D470VX LCD SCREEN

    I have two Vizio 47" 120hz LCD TVs, the E472VLE good LCD screen and bad main board and the E3D470VX with a crack LCD screen and good main board, but E3D470VX is a 3D TV. I have swap the good LCD screen to the E3D470VX.

    Picture is clear on the E3D470VX TV using the E472VLE panel. Both panels have almost the same part number, my concern is are there is difference between the two panels?

    E472VLE PANEL # LC470WUH (JE) (A1)
    E3D470VX PANEL # LC470WUH-(JE) (P1)

    NOT SURE on the last four digital of the part number and what it means

    The 3D function WORKS on Direct TV with 3D glasses

    Im I ok doing this?
    Last edited by ecking767; 02-16-2014, 11:58 AM.
    Tags: None
    • patrax
      Member
      • Feb 2014
      • 33
      • USA
      #2
      Re: Vizio E472VLE vs VIZIO E3D470VX LCD SCREEN

      Imho as long as voltages match up give it a try. There is probably a different scaling process on the the 3d mainboard that drives that panel but the 2d side is most likely the same. Should plug right up. I would "Frankintv" it together carefully tho and make sure upon startup nothing smokes, just be prepared for anything if you do try it. I think it should play fine but who knows?

        Comment

        • jimmyk
          New Member
          • Sep 2012
          • 2
          • USA
          #3
          Re: Vizio E472VLE vs VIZIO E3D470VX LCD SCREEN

          I have done the same swap , but have never been able to see 3d, just blurred double images. still trying though.I dont have cable or 3d blu-ray but have tried vudu 3d trailers and youtube 3d. Glad to here someone has. Any suggestions on other sources ?

            Comment

            Previous template Next

            Related Topics

            Collapse
            • spice_disc
              Vizio TV M50-C1 reboot cycle and static on screen
              by spice_disc
              I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

              The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
              1 Photo
              09-08-2024, 02:37 PM
            • Ryan.man
              Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
              by Ryan.man
              Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

              My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

              This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
              02-04-2025, 12:23 PM
            • smic717394
              iphone XS turns off when press on screen.
              by smic717394
              Hi,

              I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
              07-25-2024, 10:16 AM
            • paqman
              Vizio M60-C3 black screen
              by paqman
              So our beloved M60-C3 up and died the other day. I was not there, my wife mentioned that it came on, displayed the logo, then showed the right half of the screen white and fuzzy, with the left half of the screen ok. However when I got around to looking at it, the screen would not come on at all. The indicator LED will come on, then dim a bit. After a while, the LED might blink a bunch of times. I can't get it to be consistent to do that.

              So I've got the back off and am checking voltages. The capacitors on the power supply board visually check out. No bulges or anything. They all show...
              03-02-2024, 04:37 PM
            • Chrissygizmo
              Samsung UE55JU6800K half screen dark
              by Chrissygizmo
              Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
              I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
              02-10-2025, 12:33 AM
            • Loading...
            • No more items.
            Working...