Re: Alba 32880hdf Flashing standby
did you unzip the files in the download?
did you unzip the files in the download?
-
-
Re: Alba 32880hdf Flashing standby
heres a picture or 2Attached FilesComment
-
-
Re: Alba 32880hdf Flashing standby
^^ thats not an EEPROM ..fixed so far...376 lg lcd tv's,24 onn tv;s,24 panasonic lcd,16 jvc lcd,12 marshall jcm800 amps,refurb of various disco equipment lighting,old style disco decks ,and a flymo!
----------------------------------------------
please let us know if everything works ok if your tv gets fixed, as it will be and aid for anyone else having the same problem and wishing to fix it.it would save people clogging up this site with topics that are duplicated,and can be found easily using the search function.,and taking up valuable space.enjoy your fixed tv!,hopefully!Comment
-
Re: Alba 32880hdf Flashing standby
...........Last edited by anotherdude; 01-16-2014, 04:48 PM.Comment
-
Re: Alba 32880hdf Flashing standby
only one i can see there is the 8 legged chip to the left of the yellow sticker,prob closet to the proccessor ,is that it ?,any part number,eeproms are normally 8 pin chipsLast edited by multimeter; 01-16-2014, 04:45 PM.fixed so far...376 lg lcd tv's,24 onn tv;s,24 panasonic lcd,16 jvc lcd,12 marshall jcm800 amps,refurb of various disco equipment lighting,old style disco decks ,and a flymo!
----------------------------------------------
please let us know if everything works ok if your tv gets fixed, as it will be and aid for anyone else having the same problem and wishing to fix it.it would save people clogging up this site with topics that are duplicated,and can be found easily using the search function.,and taking up valuable space.enjoy your fixed tv!,hopefully!Comment
-
Re: Alba 32880hdf Flashing standby
spi? flash chip part nu,starts like 24c******?fixed so far...376 lg lcd tv's,24 onn tv;s,24 panasonic lcd,16 jvc lcd,12 marshall jcm800 amps,refurb of various disco equipment lighting,old style disco decks ,and a flymo!
----------------------------------------------
please let us know if everything works ok if your tv gets fixed, as it will be and aid for anyone else having the same problem and wishing to fix it.it would save people clogging up this site with topics that are duplicated,and can be found easily using the search function.,and taking up valuable space.enjoy your fixed tv!,hopefully!Comment
-
Re: Alba 32880hdf Flashing standby
ahh,seen pic lol,try googling for a pin configuration,some you can short 2 pins,power tv on and remove shorts this reboots the eeprom,not on all thoughfixed so far...376 lg lcd tv's,24 onn tv;s,24 panasonic lcd,16 jvc lcd,12 marshall jcm800 amps,refurb of various disco equipment lighting,old style disco decks ,and a flymo!
----------------------------------------------
please let us know if everything works ok if your tv gets fixed, as it will be and aid for anyone else having the same problem and wishing to fix it.it would save people clogging up this site with topics that are duplicated,and can be found easily using the search function.,and taking up valuable space.enjoy your fixed tv!,hopefully!Comment
-
Re: Alba 32880hdf Flashing standby
I have a 17MB62-2.6 with fried processor but OK firmware chips. I can send you the dud board for postage cost, perhaps you can make some use of the flash chips.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Alba 32880hdf Flashing standby
Just be aware my board is a FHD 32" LG panel, yours could be Samsung 32" 720p? Cannot guarantee F/W or panel settings will be compatible.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Alba 32880hdf Flashing standby
Doesn't make much difference - the chips have the F/W on them for that set up -- now on some Vestels you can change panel settings, cannot confirm yours will be able to do this.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Alba 32880hdf Flashing standby
just had a look in my shed at all my main boards sorry but non match the number at all not even close.Comment
-
Hi guys, I’m back here my friend give me her tv, that doesn’t turn on and no standby red led. When u plug in the cord the red led of one two second is on, then turn off. If you push the power button or the remote the red led blinks but nothing happen. I give u some photo with voltage, don’t look the fuse….because I blow it for mistake nd I dint have the right replace so I just put it for test the tv. The standby voltage should be 11,88 volt on the diode, but I have 13 volts. I put in the photo the different volts I test and there are someone negative…I don’t know if it s normal. On... -
Hi all,
Error – TV not powering on - with standby red –led flashing
Model- LEDTV – 39T3500
Power boarD - shg3206a-101h
I have read through the Basic LCD TV and Monitor troubleshooting guides.
https://www.badcaps.net/forum/showthr...956#post305956, I am no ELEC engineer but can use a multi meter and soldering iron
In the meantime I could not see any damage to any caps on the cold side of the power board, so I have replaced all of them.
Unplugged the power connector on the board, I plugged the power cable in waited... -
As the Elitebooks (820, 840 all gens) only show flashing Power LED and flashing CapsLock (continuously) + a very soft "ticking" noise near the DC Jack,
I wonder if re-flashing the BIOS might be of any use here.
As far as I understood, steady flashing either means insufficient power or a CPU/GPU/Motherboard issue. I use the original 65watt power supply.
There are so many threads out there, but most of the solutions involve flashing codes, which I dont have or claim that you MUST use the original power supply, do a hard reset, reseat the RAM, clean the RAM,... -
I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
Obviously the same LVDS connector for the screen connection... -
TV standby light flash once after plug-in AC power. Then silent. No backlight, no LCD image on flash light test, no SPDIF light.
All PSU voltages to main looks good (12v, 20v (label says 18v but is 20), standby voltage) Probing main board shows what appears to be a DCDC converter (MSH6103A can't find datasheet) providing 5v, 3.3v and 1v. 5v present to the standby light power switch board.
These HiSense TVs appears to have lots of firmware corruptions that takes out the main board either through smartTV use or firmware update. Used main board...
Comment