LCD TV (Matsui) - Blank Screen, Inverter problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Paul Leadbeater
    New Member
    • Aug 2013
    • 6
    • UK

    #1

    LCD TV (Matsui) - Blank Screen, Inverter problem

    I have a Matsui MAT15L607 Flat Screen TV with the following problem:-
    TV turns on, screen lights up for 2 seconds then goes blank, sound is OK.
    Picture can be seen faintly when shining a light on the screen.

    I am fairly certain that this is due to a faulty Inverter board. I have also found out that the most common failure is faulty high voltage capacitors.

    My problem is that I cannot find a supplier for replacement capacitors.
    The inverter board is a Vestel 17IPS01-2 and the components are -
    C354 - 4.7 pF, 3000 volt capacitor;
    C355 & C356 - 12 pF, 3000 volt capacitors.

    I'm capable of replacing these items if only I can find somewhere to buy them!

    Any suggestions would be welcome. Thanks.
  • Caleb
    Smokin IC's
    • Feb 2013
    • 645
    • USA

    #2
    Re: LCD TV (Matsui) - Blank Screen, Inverter problem

    In my limited experience, the inverter transformers are the most likely failure. If and when those little high voltage caps go its usually in a spectacular fashion with a big bang and magic smoke. Digikey will have those caps, not sure where you can find them on your side of the pond though, Tom may have some in his store. You can test the transformers with a multimeter on ohms if you find one that is not like the rest you will probably have the culprit, finding replacements can be difficult though.
    Liberating magic smoke one part at a time

    Comment

    • budm
      Badcaps Legend
      • Feb 2010
      • 40746
      • USA

      #3
      Re: LCD TV (Matsui) - Blank Screen, Inverter problem

      12pF 3KV:
      http://www.digikey.com/product-detai...070-ND/2589408

      4.7pf (or 5pF) 3kv hard to find them in stock.
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

      Comment

      • Paul Leadbeater
        New Member
        • Aug 2013
        • 6
        • UK

        #4
        Re: LCD TV (Matsui) - Blank Screen, Inverter problem

        Originally posted by Caleb
        In my limited experience, the inverter transformers are the most likely failure. If and when those little high voltage caps go its usually in a spectacular fashion with a big bang and magic smoke. Digikey will have those caps, not sure where you can find them on your side of the pond though, Tom may have some in his store. You can test the transformers with a multimeter on ohms if you find one that is not like the rest you will probably have the culprit, finding replacements can be difficult though.
        Thanks Caleb. I've got a multimeter, so I'll have a look at the transformers.

        Comment

        • Paul Leadbeater
          New Member
          • Aug 2013
          • 6
          • UK

          #5
          Re: LCD TV (Matsui) - Blank Screen, Inverter problem

          Originally posted by budm
          12pF 3KV:
          http://www.digikey.com/product-detai...070-ND/2589408

          4.7pf (or 5pF) 3kv hard to find them in stock.
          Thanks budm. I don't know if the shipping costs from America to UK would be too expensive, so I'll need to keep looking in this country.

          Comment

          • vinceroger69
            Badcaps Legend
            • Mar 2012
            • 6714
            • uk

            #6
            Re: LCD TV (Matsui) - Blank Screen, Inverter problem

            http://www.ebay.co.uk/sch/i.html?_fr...V&LH_PrefLoc=1
            both values listed

            Comment

            • Paul Leadbeater
              New Member
              • Aug 2013
              • 6
              • UK

              #7
              Re: LCD TV (Matsui) - Blank Screen, Inverter problem

              I don't know how I missed that! I've now ordered both items.
              Thanks for the info.

              Comment

              • Paul Leadbeater
                New Member
                • Aug 2013
                • 6
                • UK

                #8
                Re: LCD TV (Matsui) - Blank Screen, Inverter problem

                Originally posted by vinceroger69
                I don't know how I missed that!
                I've now ordered both items.
                Thanks for the info.

                Comment

                • vinceroger69
                  Badcaps Legend
                  • Mar 2012
                  • 6714
                  • uk

                  #9
                  Re: LCD TV (Matsui) - Blank Screen, Inverter problem

                  glad the link helped you hope it fixes your issues.

                  Comment

                  Related Topics

                  Collapse

                  • mmccomputer
                    problem with replacing lcd screen
                    by mmccomputer
                    I have an HP model : 14-cf0011nf and I want to change its display screen (it has an original 14" full HD TN 30 pins panel) which works without problem but I want to put another screen with an IPS panel, the problem is that I tried several screens but there is no display except with the original screen, I never had this problem before I changed hundreds without problems but this PC is not 'accepted than its original screen
                    otherwise on the motherboard it displays edp and I don't know, do the panels I tried only work with the LVDS protocol?
                    If anyone has any information on the subject...
                    12-15-2024, 03:44 PM
                  • jimjoe123
                    LCD TV Green/Pink screen problem
                    by jimjoe123
                    I have a Dick Smith 37" LCD TV, Model GE6804. I am using it as PC extended monitor only.

                    Problem is while watching tv, I hear a semi loud click(like a electrical breaker tripping due to overload, just sound like it but no actual electrical overload), then screen is covered with green or pink. I can still see the original picture image but overlayed by green or pink. See attached images. Pink.jpg is what I see, and Normal.jpg is before green or pink screen, What I captured was pink screen, but about 80% of time it's green and 20% of time it's pink.

                    Then each time...
                    02-23-2020, 01:29 AM
                  • Chrissygizmo
                    Sony KD-55XG9505 lines on screen problem
                    by Chrissygizmo
                    Hello again everyone,

                    This is my latest mission, to try getting this Sony tv back to normal working order…

                    I've only just got it today, when you power it up everything is as should be, in fact it works perfectly for a few minutes then the screen starts getting horizontal lines on & eventually the full screen goes back, I will upload photos of the problem & also some photos of the board etc. You might notice that I'm busy trying the tape method, I'm not sure exactly where the clock lines are so I'm just guessing & hoping for the best lol . I've already tried...
                    02-19-2025, 11:31 AM
                  • dicky96
                    HP Elitebook Screen blank - backlights but no image
                    by dicky96
                    Hi guys
                    I'm trying to fix this laptop screen

                    Basically the owner is a computer shop and they brought it to me with two screens. They said the repair shop they use could not fix it, so I thought i would try to see if I am better than their current repairer!

                    OK so I have the original screen which works but has lines across the bottom quarter of the screen

                    I have the replacement screen, which they fitted and it worked. They then put the laptop on one side for a couple of weeks until they found a buyer. When they showed it to the buyer, the screen would...
                    04-28-2021, 07:30 AM
                  • Kalman27
                    Lenovo IdeaPad Slim 5 14IAH8 - Type 83BF OLED Blank screen
                    by Kalman27
                    We have a Lenovo IdeaPad Slim 5 14IAH8 - Type 83BF for repair. The original issue the OLED screen is blank.

                    We have replaced the OLED screen with the exact model, also we replaced the LCD cable, but no luck.

                    I think there is something with the motherboard. I don't really have experience with OLED screens so far, so not sure how it should work. I have seen some laptop comes with a separate controller board, but this model does not.

                    Also, there is an error in Windows device manager - This device cannot start (Code 10) - Intel(R) Serial IO I2C Host Controller...
                    06-17-2025, 05:52 AM
                  • Loading...
                  • No more items.
                  Working...