Announcement

Collapse
No announcement yet.

Vizio E460ME 46" LCD Color Bars

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
    #21
    Re: Vizio E460ME 46" LCD Color Bars

    Awesome.

    Comment

      #22
      Re: Vizio E460ME 46" LCD Color Bars

      Hey Guys-

      I'm placing an order with Allied Electronics for some other things and I figured I'd pick-up a few resistors to fix this set. Since modern electronics are fairly new to me I'm not sure what I should order. Anyone have any idea what wattage these tiny resistors are? Are they considered "thick-film" type?

      Thanks,
      Matt

      Comment

        #23
        Re: Vizio E460ME 46" LCD Color Bars

        82 ohm 0402 or 0603 size. Watt rating unimportant: just match size.
        Also get some quality solder wick and flux cleaner/isopropanol alcohol (90%+)
        Last edited by tom66; 12-06-2013, 06:53 PM.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

          #24
          Re: Vizio E460ME 46" LCD Color Bars

          Thanks Tom, that helps.

          I would also like to replace the cap above the bad resistor in my photo. It seems OK but I don't like the looks of it. It was said that the value should be 1uf. Any idea what size cap I should order?

          Also, what type of solder is recommended to use?

          Thanks again for all the help,
          Matt

          Comment

            #25
            Re: Vizio E460ME 46" LCD Color Bars

            That cap looks like an 0805 or 1008. Get one that is rated to at least 25v. You can always take some calipers to it if you aren't sure of the size.
            Last edited by Th3_uN1Qu3; 12-08-2013, 06:33 AM.
            Originally posted by PeteS in CA
            Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
            A working TV? How boring!

            Comment

              #26
              Re: Vizio E460ME 46" LCD Color Bars

              Finally had some time to get to this set. Removed the bad resistor and soldered in a new one. (I am still cross-eyed - that resistor is tiny)! TV works great! Been watching it for a few nights now with no issues! Success!

              Thanks again for everyone's help,

              Matt

              Comment

              Previous 1 2 template Next
              Working...
              X