Vizio E460ME 46" LCD Color Bars

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • johnboy1313
    Badcaps Legend
    • Nov 2012
    • 1959
    • USA

    #21
    Re: Vizio E460ME 46" LCD Color Bars

    Awesome.

    Comment

    • mdmccool
      Member
      • Feb 2013
      • 28
      • USA

      #22
      Re: Vizio E460ME 46" LCD Color Bars

      Hey Guys-

      I'm placing an order with Allied Electronics for some other things and I figured I'd pick-up a few resistors to fix this set. Since modern electronics are fairly new to me I'm not sure what I should order. Anyone have any idea what wattage these tiny resistors are? Are they considered "thick-film" type?

      Thanks,
      Matt

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #23
        Re: Vizio E460ME 46" LCD Color Bars

        82 ohm 0402 or 0603 size. Watt rating unimportant: just match size.
        Also get some quality solder wick and flux cleaner/isopropanol alcohol (90%+)
        Last edited by tom66; 12-06-2013, 06:53 PM.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • mdmccool
          Member
          • Feb 2013
          • 28
          • USA

          #24
          Re: Vizio E460ME 46" LCD Color Bars

          Thanks Tom, that helps.

          I would also like to replace the cap above the bad resistor in my photo. It seems OK but I don't like the looks of it. It was said that the value should be 1uf. Any idea what size cap I should order?

          Also, what type of solder is recommended to use?

          Thanks again for all the help,
          Matt

          Comment

          • Th3_uN1Qu3
            Believe in
            • Jul 2010
            • 6031
            • Romania

            #25
            Re: Vizio E460ME 46" LCD Color Bars

            That cap looks like an 0805 or 1008. Get one that is rated to at least 25v. You can always take some calipers to it if you aren't sure of the size.
            Last edited by Th3_uN1Qu3; 12-08-2013, 06:33 AM.
            Originally posted by PeteS in CA
            Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
            A working TV? How boring!

            Comment

            • mdmccool
              Member
              • Feb 2013
              • 28
              • USA

              #26
              Re: Vizio E460ME 46" LCD Color Bars

              Finally had some time to get to this set. Removed the bad resistor and soldered in a new one. (I am still cross-eyed - that resistor is tiny)! TV works great! Been watching it for a few nights now with no issues! Success!

              Thanks again for everyone's help,

              Matt

              Comment

              Related Topics

              Collapse

              • Daren87
                Sony 8K XBR-75Z8H White Screen Vertical Bars Tcon Code. Help NeededπŸ™
                by Daren87
                Hello everyone,

                I've recently been given a Sony 8k Z8H. It's got a white screen with two vertical black bars. At times it's given me the 5 blink Tcon code. Testing voltage on the Tcon I can see some low or missing voltage. I've done a basic visual check of cables and the COF. Not seeing anything obvious. The original Tcon seemed to have good caps until turning it over. On the bottom I found maybe 10 caps with both sides of the caps shorting to ground. I thought ok these caps and likely other components on the Tcon are shorted so let's try a replacement Tcon. I just received the...
                08-13-2023, 03:25 PM
              • x_orange90_x
                TCL 50S535 bad tcon or panel issue?
                by x_orange90_x
                Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
                03-29-2025, 11:02 PM
              • x_orange90_x
                Vizio V585-J01 dancing lines and image doubling
                by x_orange90_x
                I got this tv yesterday and it shows a screen full of colored vertical bars and horizontal lines that move, change, and dance around. When the set is powered on there is a slight buzz from the tcon. I removed one ribbon at a time and this was the result:

                Right side connected, left side disconnected = half image on right (somewhat distorted, see photo attached) white screen on left. NO buzzing from TCON

                Left side connected, right side disconnected = right side black, left side white with distorted horizontal lines near top of screen. Buzzing from TCON

                I swapped...
                06-12-2024, 07:57 AM
              • Tynan Dill
                Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                by Tynan Dill
                I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                Upon bringing it home and plugging it up, it showed a standby light.

                I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                The screen seems to blackout and stay black, but with a flashlight I can see the display.

                With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                Assuming...
                11-22-2024, 01:46 PM
              • ninja_zx11
                Sharp LC-70LE650U vertical black and red bars
                by ninja_zx11
                Hi all,

                70" LED TV is Sharp LC-70LE650U.

                Initial problem was horizontal lines and slow motion lurrs on the bottom left of the screen. So I removed both the left and right ribbon cables from the T-con board and tried to clean it with alcohol and when I put it back, this issue appeared. I tried carefully reinserting the ribbon bon cables but same thing. I checked the traces of the ribbon cables with magnifying glass and everything looks good. I cleaned the small jumper ribbon cable on the left side of the screen which cured the horizontal line and slow motion blurs...
                07-07-2023, 11:27 PM
              • Loading...
              • No more items.
              Working...