Philips 50PF9631D/37 - 6 Red Blinks on Front LED

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • Scuse
    Senior Member
    • Jan 2013
    • 50
    • United States
    #41
    Re: Philips 50PF9631D/37 - 6 Red Blinks on Front LED

    Okay I see that one. It's right next to the cap I said was slightly swollen. I've found em for around $125 US

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK
        #42
        Re: Philips 50PF9631D/37 - 6 Red Blinks on Front LED

        What's the part number on that IC?
        IMO, $125 is steep -- this board can be repaired for -much- less.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment

          • Scuse
            Senior Member
            • Jan 2013
            • 50
            • United States
            #43
            Re: Philips 50PF9631D/37 - 6 Red Blinks on Front LED

            I agree it's very steep. The top of the IC read: 1207P CPEY 0605G

              Comment

              • vinceroger69
                Badcaps Legend
                • Mar 2012
                • 6714
                • uk
                #44
                Re: Philips 50PF9631D/37 - 6 Red Blinks on Front LED

                Originally posted by Scuse
                The fuse is on the left hand side of the first picture under the heatsink and the cap that is slightly swollen is on the right hand side of the second picture next to the heatsink. This is the same heatsink, just different sides.
                yes that cap defently needs changing its swollen quite bad theres also a lot of devices screwed on to the heat sinks do they test ok? not sure how to test the ic tom mentioned maybe he will advise you? could that bulged cap be short circuit causing the fuse to blow? i am not sure if you can use a light bulb across that fuse to save keep blowing them tom or budm may advise you there.

                  Comment

                  • tom66
                    EVs Rule
                    • Apr 2011
                    • 32560
                    • UK
                    #45
                    Re: Philips 50PF9631D/37 - 6 Red Blinks on Front LED

                    No info on that chip . Are you certain about that part #?
                    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                      Comment

                      • tw2005
                        Badcaps Legend
                        • Oct 2011
                        • 6458
                        • Australia
                        #46
                        Re: Philips 50PF9631D/37 - 6 Red Blinks on Front LED

                        Originally posted by tom66
                        No info on that chip . Are you certain about that part #?
                        I think this is very close to what it may be.

                        1207P
                        CPEY
                        0605G
                        Attached Files
                        Last edited by tw2005; 02-15-2013, 08:06 AM.

                          Comment

                          • tom66
                            EVs Rule
                            • Apr 2011
                            • 32560
                            • UK
                            #47
                            Re: Philips 50PF9631D/37 - 6 Red Blinks on Front LED

                            Great -- looks like it. I'll try and post back later, lectures now.
                            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                              Comment

                              • tom66
                                EVs Rule
                                • Apr 2011
                                • 32560
                                • UK
                                #48
                                Re: Philips 50PF9631D/37 - 6 Red Blinks on Front LED

                                The pin DRV should connect to a MOSFET on the heatsink -- does it?
                                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                  Comment

                                  • Scuse
                                    Senior Member
                                    • Jan 2013
                                    • 50
                                    • United States
                                    #49
                                    Re: Philips 50PF9631D/37 - 6 Red Blinks on Front LED

                                    Sorry for not getting back sooner. I bought a power board and got it in the mail two hours ago. I just put it in and got it all back together. It works an looks amazing. The ambilight isn't turning on. I call it a great victory even if the war isn't over. About to see what's going on with the ambilight.

                                      Comment

                                      • tom66
                                        EVs Rule
                                        • Apr 2011
                                        • 32560
                                        • UK
                                        #50
                                        Re: Philips 50PF9631D/37 - 6 Red Blinks on Front LED

                                        Make sure the amblight power connector is connected. I'm on the look out for a Philips plasma or LCD with amblight, because I want to see if it is as good as Philips say.
                                        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                          Comment

                                          • martyparish
                                            Badcaps Veteran
                                            • Dec 2012
                                            • 313
                                            • United States
                                            #51
                                            Re: Philips 50PF9631D/37 - 6 Red Blinks on Front LED

                                            Scuse, great news that you got it running!

                                            Tom, I have a Philips w/ ambilight for ya...too bad the YSUS and buffers are shot Plus this thing weighs a ton...

                                              Comment

                                              Previous 1 2 3 template Next

                                              Related Topics

                                              Collapse
                                              • Biruslapio
                                                Panasonic P58V11B 8 and 12 blinks error "fix"
                                                by Biruslapio
                                                Bought this TV used not working, panel flashed briefly on power up and it was blinking 8 times, a quick look on SS board revealed a common fault on the 3uF 250V capacitors, C201 to C205 (C1620X in the service manual), the solder joints were all cracked, C201 and C205 pins were darkened and some sparking had occurred on them, C201 was split open and clearly overheated in its last hours, replaced that one and resoldered the others, 8 blinks fixed.

                                                Also the previous owner broke the antenna connector by taking the TV out of the wall mount forgetting to unplug it, I desoldered the tuner...
                                                04-13-2021, 07:13 AM
                                              • jimbofz
                                                philips 55 oled 745 /12 3 blinks
                                                by jimbofz
                                                Hi this tv was fine until the owner moved to another address,
                                                it comes on in sby with 3 blinks and psu wont start up .
                                                tried a power on reset by holding down power on button on rear of tv and applying mains no luck
                                                first inspected for damage dry joints or loose foils no joy
                                                checked psu volts ,the 12v and 24v supplies should be switched on by the main board no volts
                                                i read on the net that the micro on some later philips may need a reflow ,removed psu checked all caps with esr meter all ok
                                                removed main board
                                                and heatsink on micro
                                                heated...
                                                02-15-2021, 05:49 AM
                                              • jason123
                                                Philips 55PFL5601/F7 Voltages ok, But not turning on - No front light
                                                by jason123
                                                Hi
                                                I have this Philips 55PFL5601/F7 TV, seems to have all the right voltages including the PS-ON+21V (20.967V) and P-ON=H2 (3.3V) but front LED is not lit, no response to remote and not turning on.

                                                The keypad connects to front IR board, then from IR board, there is a ribbon cable that goes to main board. Haven't tested that link. But, with PS-ON+21V high, TV should be on, right? I'm not getting picture, backlight or any activities.

                                                I read some posts about C3214 or so.. but doesn't seem applicable.

                                                Help!...
                                                12-06-2020, 09:58 AM
                                              • Nairolf
                                                Samsung DM32D – Red LED blinks 5 times, won’t start (possible mainboard issue)
                                                by Nairolf
                                                Hello,

                                                I have a Samsung DM32D display.
                                                When I try to power it on, the red LED blinks 5 times and nothing happens—the unit won’t start.

                                                Here’s what I have tried so far:
                                                1. Disconnected the cable between the mainboard and the power supply → the backlight turns on.
                                                2. Disconnected the main T-CON ribbon cable → same issue as before, the LED still blinks 5 times.
                                                3. Disconnected one of the two T-CON ribbons to the panel (tested each one separately) → same issue, the LED blinks 5 times.

                                                From these tests, I suspect the problem might be on the mainboard. Could anyone...
                                                3 Photos
                                                Today, 03:47 AM
                                              • G33RT
                                                Philips 8200 series 65PUS8204/12 stuck at Philips Logo
                                                by G33RT
                                                Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.

                                                It does power up when pressing the power button.

                                                I already try the power button while plugin the plug with no result.
                                                Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.

                                                Could this be an PSU or eMMC issue ?
                                                07-19-2025, 03:43 AM
                                              • Loading...
                                              • No more items.
                                              Working...