Rca hd61w66 tv

[keico]

Ok first wanted to say thank you for all the previous help I received with Plasma TV questions.

Now a few weeks ago some one threw out a RCA 61" rear projection TV model number HD61W66

TV looks like this

What was wrong was the coaxial connector for the cable box wire hook up was broken. Probably somebody's foot got caught on the cable wire and pulled the wire so hard it broke the connector.

Now what I did was order this



I installed it but it is loose. It works but I am not satisfied.

What I would like to do is replace the Tuner module. I believe it is made by Thomson

It looks like this



The tuner board is this one



I have searched and searched but can not find the tuner module.

Does anyone know where I can find these and a part number also

[selldoor]

Re: Rca hd61w66 tv

Hi - Please can you update your profile with Country and Mains Voltage. It helps a lot when asking where to obtain parts. We also ask that pictures are not posted in line but
added using manage attachments which is found by "going advanced" under quick reply.

[selldoor]

Re: Rca hd61w66 tv

Why have you posted a picture of another tuner - please post a picture of yours showing the part number - please use manage attachments

[keico]

Re: Rca hd61w66 tv

Hi - Please can you update your profile with Country and Mains Voltage. It helps a lot when asking where to obtain parts. We also ask that pictures are not posted in line but
added using manage attachments which is found by "going advanced" under quick reply.

I have updated profile.

The picture of the Board is the exact same one in my TV

RCA small signal board AS222-710 DUO

The other picture is just so there is no confusion as to what part I am looking for

[awyatt2]

Re: Rca hd61w66 tv

these sets have two tuners a small one and a large one the 222a chassis, i have both tuners, the set has a bad cpu as far as i know tuners are ok.

[keico]

Re: Rca hd61w66 tv

these sets have two tuners a small one and a large one the 222a chassis, i have both tuners, the set has a bad cpu as far as i know tuners are ok.

The large one is the one I need.

Do you want to sell it to me

[awyatt2]

Re: Rca hd61w66 tv

i have no idea what it is worth, make an offer? you can have both if you want them i just have to desolder them from the boards. they are out of a 60 but dont think that matters. they are from the 222a chassis, rca.

[budm]

Re: Rca hd61w66 tv

I fixed a lot of these broken COAX jack in VCR/TV, if you have good 60watts Iron and flux, you can solder the body of the jack to the chassis of the tuner. You have to be real good at soldering or you will melt the insulator in side the connector.
Or you can use this: http://www.mmwavetech.com/shop.net/p...name=MW-819-DD
What you do is to get the nut for this F connector and solder the nut to the chassis and then screw in the new connector deep enough to solder the center tab to the PCB, the use LOKTITE and washer to fill the gap.
You can get the jack from MCM, or shop around.

[awyatt2]

Re: Rca hd61w66 tv

i have both tuners removed and all looks good, no burned insulators or connections, if you want them make offer. the cpu was bad in the set it would not pass diag. wasnt worth spending money on, to me. a good ssb board was about 75.00.i don't even like opening projection tv's anymore.

[keico]

Re: Rca hd61w66 tv

ok i found the part number for the tuner

NTSC TUNER FE 6240A

I believe the part number is 264657

[selldoor]

Re: Rca hd61w66 tv

ok i found the part number for the tuner

NTSC TUNER FE 6240A

I believe the part number is 264657

selldoor
Re: Rca hd61w66 tv
Why have you posted a picture of another tuner - please post a picture of yours showing the part number - please use manage attachments


The other picture is just so there is no confusion as to what part I am looking for

Confusion reigns supreme!