Passive PFC - The HongKongFlyApart way

[370forlife]

Re: Passive PFC - The HongKongFlyApart way

Thats strange. Never seen PPFC with a onboard choke. Do you have pictures of it?

[Krankshaft]

Re: Passive PFC - The HongKongFlyApart way

Nope two filter caps and a manual autorange switch so passive PFC.

I think I only have one active PFC power supply in the whole house my PSUs are ancient .

[370forlife]

Re: Passive PFC - The HongKongFlyApart way

If it has a onboard choke it is probably Active PFC.

[Krankshaft]

Re: Passive PFC - The HongKongFlyApart way

I have plenty of passive PFC supplies here and all have onboard chokes not a single external one to be found.

Still don't get why they're commonplace in Europe and not in the US.

[Colt45ws]

Re: Passive PFC - The HongKongFlyApart way

The external coil is supposed to be for passive PFC which uses a large transformer like that.
Since many markets require at least passive PFC now and all these people can seem to put together are the same 2 decade old designs; it seems they have started to fake PFC.

[Krankshaft]

Re: Passive PFC - The HongKongFlyApart way

I've never owned a PSU with an external choke like that. I've only seen them in PSUs designed for the European market.

Some stricter regulations for suppressing line noise maybe?

I knew that transformer was fake before you even opened it the external tape on the transformer was too far forward.

Check this out for more details on this deceiving practice:

The insides of an external choke on a cheap supply. Guess copper wasn't in the budget !

http://*************/photo/my-images/160/img2319.jpg/

Check these PSUs they're even worse:

They just jammed a few pieces of iron together into the bobbin to make it feel heavy enough to be real. Another manufacturer filled the bobbin with ground up iron filings and taped it up. Great way to get rid of manufacturing waste don't you think ? Another just glued the plastic bobbin to the underside of the PSU case without an E core and you guessed it more iron plates for weight. Some manufacturers have gone high tech and molded a solid piece of iron that fits into the bobbin instead of individual iron plates!

All of course have a continuous loop of insulated dummy wire to make it look legit from the outside.

http://www.cloudfrom.com:8080/showIt.../10680033.html

Bad caps are bad enough but as consumers from other countries keep buying this disposable Chinese crap they get more and more ballsy like this. It pisses me off to no end!

At least you can tell when you'll find these fake coils because they are usually accompanied by Hong Kong Flyapart (gutless wonder) built quality an undersized discrete line rectifier, undersized paper thin heatsinks, undersized switching and secondary rectification components, etc.

[b700029]

Re: Passive PFC - The HongKongFlyApart way

http://4hv.org/e107_plugins/forum/fo...ic.php?77658.0
http://www.cloudfrom.com:8080/showIt.../10680033.html

You're not the first to notice this...

[ratdude747]

Re: Passive PFC - The HongKongFlyApart way

it's the presidental edition!

epic fail... only other 2 dummy weight psu's mentioed on BCN:

1. KC's echo star
2. fake dell PA-10 (referenced from another forum)

but at least those 2 did something, even though not performing up to spec. this, well, is 100% useless.

[Colt45ws]

Re: Passive PFC - The HongKongFlyApart way

Wow, it has two y caps. They went all out on this one didnt they?

[c_hegge]

IMO, this is just as bad (but funny) as kc8's echo star with dummy weights. It's from an "AOBAMA" branded unit, the OEM of which has to be HongKongFlyApart Company (R) LLC. Enjoy .