-
Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
-
Re: Antec Phantom 500 power supply
I just noticed that the OST cap has a T-shaped vent. Is it fake?Comment
-
ASRock B550 PG Velocita
Ryzen 9 "Vermeer" 5900X
32 GB G.Skill RipJaws V F4-3200C16D-32GVR
Arc A770 16 GB
eVGA Supernova G3 750W
Western Digital Black SN850 1TB NVMe SSD
Alienware AW3423DWF OLED
"¡Me encanta "Me Encanta o Enlistarlo con Hilary Farr!" -Mí mismo
"There's nothing more unattractive than a chick smoking a cigarette" -Topcat
"Today's lesson in pissivity comes in the form of a ziplock baggie full of GPU extension brackets & hardware that for the last ~3 years have been on my bench, always in my way, getting moved around constantly....and yesterday I found myself in need of them....and the bastards are now nowhere to be found! Motherfracker!!" -Topcat
"did I see a chair fly? I think I did! Time for popcorn!" -ratdude747Comment
-
Re: Antec Phantom 500 power supply
Found pics of same PSU with mixed Mucon and Fuhjyyu.
.
http://translate.google.com/translat...%26prmd%3DivnsAttached FilesMann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
-
Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Re: Antec Phantom 500 power supply
Look at the second to last image in post 8. The OST and the green Teapos appear to be shorter than the Fuhjyyus in the image you posted.
It is strange to see thermal pads between the primary caps and the case.
At least this power supply has one good cap.Last edited by lti; 07-30-2011, 07:11 PM.Comment
-
Re: Antec Phantom 500 power supply
Wtf was going on in Antec's mind when they picked Fuhjyyu as a choice for capacitor?
Well atleast they don't do too much of that anymore...Comment
-
Re: Antec Phantom 500 power supply
Antec
Given the fact that their StupidPower series had 100% failure rates, I would have expected antec to never ever use non japanese capacitors againI love putting bad caps and flat batteries in fire and watching them explode!!
No wonder it doesn't work! You installed the jumper wires backwards
Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium
Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 ProComment
-
Re: Antec Phantom 500 power supply
Alas, we still have units with OST and other junk. Woohoo. But you really have to be buying rock bottom Antec to get that junk.Comment
-
Re: Antec Phantom 500 power supply
They still use them in earthwatts and SU series units. not top end, but not rock bottom.I love putting bad caps and flat batteries in fire and watching them explode!!
No wonder it doesn't work! You installed the jumper wires backwards
Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium
Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 ProComment
-
Re: Antec Phantom 500 power supply
Oh yeah, basiq tooI love putting bad caps and flat batteries in fire and watching them explode!!
No wonder it doesn't work! You installed the jumper wires backwards
Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium
Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 ProComment
-
Re: Antec Phantom 500 power supply
I haven't seen OST in Earthwatts [I don't think] but lots of LTEC and some Taicon.
Haven't seen a Basiq at all but as I recall from reading they use mostly CapXon and maybe OST.
[Note: I'm on my first cupp'a coffee. Still have brain fog.]
All the Smart Powers and the various 'True'-whatevers plus about everything else they made during that time were Fuhjyyu happy builds.
- All the CWT built units.
They switched to Seasonic as their builder for a while but the Seasonic-Antecs got OST and Capxon.
Then they switched to Delta and those get LTEC and Taicon.
They made something [at least for a while] they claimed was all Jap caps but it was so far over priced you'd have to be on crack to think it was a good deal.
-
This Antec Phantom 500 is one of the older CWT builds as evidenced by the markings on the PCB in one of the photos.
.
.Last edited by PCBONEZ; 07-31-2011, 08:41 AM.Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Re: Antec Phantom 500 power supply
i have one of these at the shop.yep "mucon" caps.
i got visions of a bunch of chinamen spitting in the caps as they go down the line.have to name them correctly!Comment
-
Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Re: Antec Phantom 500 power supply
Not trying to revive an old thread but I'm going to buy some capacitors and re-cap a Antec Phantom 500, and was wondering if you can help me with what caps to use on this PSU.
I have decided to use Panasonic's FK,FM and FC series of capacitors as that's what available on Farnell's site
Here's what I'm going to use:
10 MUcon MX(M) 3300uF 6.3V 10x25
(Recap=Panasonic (EEUFK0J332L) FK 3300uF 6.3v 10x30)
7 Mucon MX(M) 3300uF 16V 10x30
(Recap=Panasonic (EEUFK1C332L) FK 3300uF 6.3v 12.5x30)
Can't find 10mm ones
1 Mucon LQ(M) 680uF 25V 10x15
(Recap=Panasonic (EEUFM1E681) FM 680uF 25v 10x20)
2 Mucon MX(M) 2200uF 16V 10x25
(Recap=Panasonic (EEUFK1C222L) FK 2200uF 16v 10x30)
1 Taepo SEK 470uF 16V 8x15
(Recap=Panasonic (EEUFM1C471) FM 470uF 16v 10x15)
2 Taepo SC 1000uF 10V 8x15
(Recap=Panasonic (EEUFM1A102) FM 1000uF 10v 8x20)
1 Taepo SC 330uF 16V 6x15
(Recap=Panasonic (EEUFM1C331) FM 330uF 16v 8x11.5)
Can't find 6mm ones
1 Taepo SEK 100uF 16V 5x12
(Recap=Panasonic (EEUFC1C101) FC 100uF 16v 6.3x11.2)
3 Taepo SC 47uF 25V 5x7
(Recap=Panasonic (EEUFC1E470) FC 47uF 25v 5x11)
2 OST RLP 1000uF 6.3V 8x12
(Recap=Panasonic (EEUFC0J102) FC 1000uF 6.3v 10x12.5)
1 OST RLG 10uF 50V 5x10
(Recap=Panasonic (EEUFC1H100) FC 10uF 50v 4x11)
2 Ncc KY 1000uF 16V 8x19
(Recap=Panasonic (EEUFM1C102) FM 1000uF 16v 10x20)
1 Fuhjyyu LH 330uF 400V 24x50
(Recap=Panasonic (EETHD2G331HJ) 330uF 400v 22x50)
Does this look right? FM, FC, and FK are low ESR right?
Thanks for reading my post, hope someone can help me with this.Comment
-
I love putting bad caps and flat batteries in fire and watching them explode!!
No wonder it doesn't work! You installed the jumper wires backwards
Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium
Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 ProComment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump
One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy... -
I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails
I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time... -
The sub developed a constant popping every couple seconds from woofer and power LED flickering with nothing but wall AC connected. Connecting an audio cable didn't change anything. It doesn't play but a second or two of audio in between the pops.
Opened it up and discovered the power supply is making a faint clicking or ticking sound.
I measured the amp's output to the woofer and it pulses up to 50mv DC to be driver. The pulses coincide with the power supply ticking/clicking.
I measured the power supply output going to the amp board and it too has this pulsing. Voltage cycles... -
Hello Everybody,
Trying to repair a power supply from a Russound CA4 Multizone Controller (picture attached)
Russound no longer supports it but were kind enough to provide a schematic of the power supply (pdf attached).
The outputs marked 12v and 20v are all measuring only 1v.
The board is clicking, which I think means it is in something called hiccup mode when the flyback transformers switches because of an internal problem or something else on the board Overloading it.
The capacitors physically look clean (no bludgesor leaks) and...
Comment