Dell G3 15 3500 bios help
Collapse
X
-
-
Service Tag: CM191B3
Try with new build
Flash both
Wait few minute after program file
Must check with heatsinkAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
Comment
-
desculpe pela falha,
não consigo adicionar service tag
Funciona mas o cooler está acelerado e dá erro de tag, não consigo adicionar pela bios
Minha Tag HJQ9M83
obrigado
placa dell 3500 pcb selek g3 mlk n18p 19795-1Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
What does it mean? What exactly is the issue? Where's your bios backup?
Do NOT post in all caps!
Read the rules before posting
RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/troubl...before-posting
You MUST:- Provide a BIOS/EC dump if possible
- Attach files directly to your post instead of linking to external websites
- Post what the problem is, be specific - black screen, no boot, running slow, password. Do NOT post "clean me", "clear bios", "clean bios", "fix bios", "bios need" or other such terms
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------Doctrina est fructus dulcis, radicis amarae..Comment
-
sorry for the mistake,
I can't add service tag
It works but the cooler is accelerated and gives a tag error, I can't add it through the bios
My Tag HJQ9M83
thanks
dell board 3500 pcb selek g3 mlk n18p 19795-1Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
-
He you go. 100 % working bios with service tag add and manufactoring mode disableAttached Filesif you find these attachements useful please consider making a small donation to the site
Badcaps Electronics Repair Forum & Schematic SearchLast edited by Vesko356; 02-25-2024, 04:08 AM. Reason: External url removed. File attached to post from external link.Comment
-
RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/showthread.php?t=103570
❤️Extarnal link not allow❤️
RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/showthread.php?t=103570Comment
-
Comment
-
Hello. Can you help me? I have the Dell G3 3500 P89F002 notebook. It only shows video the first few times after resetting the bios. But it turns on and the video appears the same as the attached image, the fans are at maximum and when you click to enter the setup it restarts without video and the orange and 7 white LEDs (LCD) blink twice. I switched to the 8mb and 16mb bios from the last post by member "kostukas1985" and it worked but it keeps giving the Service Tag message.
My Service Tag is 3JWR8G3
Thanks.Attached Filesif you find these attachements useful please consider making a small donation to the site
2 PhotosComment
-
did you try to add service tag manually from bios setup ? if not than add your service tag in the bios setup problem should resolvedHello. Can you help me? I have the Dell G3 3500 P89F002 notebook. It only shows video the first few times after resetting the bios. But it turns on and the video appears the same as the attached image, the fans are at maximum and when you click to enter the setup it restarts without video and the orange and 7 white LEDs (LCD) blink twice. I switched to the 8mb and 16mb bios from the last post by member "kostukas1985" and it worked but it keeps giving the Service Tag message.
My Service Tag is 3JWR8G3
Thanks.
if yes and problome remain same than
Flash 8MB only from #131 and use your 16mb oldComment
-
Hello. I added the service tag yes. But the following is happening, when I restart or turn it off and on again, it doesn't show video. 2 orange and 7 white flashes (LCD display). But I already got a new screen and it's still the same thing. To show video again, just reset the bios or force it to turn on and off about 5 or 7 times until it shows video. But if you turn it off or restart it, it has no image and the LEDs blink like I said.did you try to add service tag manually from bios setup ? if not than add your service tag in the bios setup problem should resolved
if yes and problome remain same than
Flash 8MB only from #131 and use your 16mb old
Can you tell me what it could be?
ThanksComment
-
Comment
-
Hello, help motherboard: selek g3 mlk n18p 19795-1 when connecting, only the keyboard backlight turns on and it restarts. That's all it does without an image, without fans, it just cycles through the reboot, turning only the keyboard backlight on and off.
CPQK463 service tagAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
Hello try this new file ...Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
Comment
Related Topics
Collapse
-
by zeniusHello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,...-
Channel: BIOS Requests ONLY!
-
-
by mikeybassHi, I hope some one has some advice for me. I searched the forums but didn't see anything relevant. I acquired two identical Dell 9010 Mid Tower computers from a business office upgrade (they were going to throw them out). Both of them have the same motherboard (00F82W). One of them works flawlessly. The other one had a corrupted BIOS. I tried flashing numerous main BIOS and EC files from the internet, but none of them worked. I decided to copy the main BIOS and EC from the working 9010 computer and successfully flashed the corrupted BIOS. This got the computer able to boot again and run norm...
-
Channel: General Computer & Tech Discussion
04-23-2025, 04:30 PM -
-
by capoplaysHey everyone,
I recently bought a Dell G15 5515 with an AMD Ryzen 7 5800H and 3060 RTX. The BIOS chip on it was dead, and my hardware guy replaced the chip. After that, everything was working fine.
The BIOS is currently at version 1.22.1, and I wanted to update it. I downloaded the latest BIOS version from Dell Support using my ST: FQZMYJ3, but when I tried to run it, it says "unsupported system." I asked my tech guy what he did, and he said he took the chip from another board and flashed it onto mine.
When I check the BIOS using the F12 menu Flash...-
Channel: BIOS Requests ONLY!
-
-
by evolpeHi guys, can anyone help me with this bios? It needs to be cleaned.
Motheboard: GDI5A LA-K033P REV 1.0 (A00)
Service TAG: BNV5GD3
I've attached the two BIOS (16MB and 8MB). The laptop turns on but only displays a backlight. I tried another BIOS and it works fine, but I can't exit manufacturing mode. Thanks to anyone who can help me....-
Channel: BIOS Requests ONLY!
-
-
by Akhlz001Hi,
Could someone help trying to unlock this BIOS, seems that Dell have changed the layout of new Dell Pro 8FC8 bioses from checking HXD - 4000 bits do not need changing, only 2000. However after FF the section starting from '01000' upto 2000 bits and then soldering the chip back it seems that the microchip on the motherboard is recovering the bios back to original settings after first boot. Has anyone found a way to crack this extra layer of security Dell have implemented? Seems both HP and Dell have upped bios security to match Lenovo by implementing extra measures on a separate...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.

Comment