Dell G3 15 3500
motherboard: selek g3 mlk n18p 19795-1
my oryginal bios here:
motherboard: selek g3 mlk n18p 19795-1
my oryginal bios here:
-
-
Re: Dell G3 15 3500 bios help
maybe someone has an account here
help me please -
Re: Dell G3 15 3500 bios help
What's your problem!
Corrpted bios , clean me, Bios PWD!Comment
-
Re: Dell G3 15 3500 bios help
here is my working dump
Comment
-
Re: Dell G3 15 3500 bios help
i have dell g3 3500 i5 gtx 1650ti, bios exe file how can i convert this file to bin, and which bios chip is for which file "dual bios" 1x MX25L6473F
other ....... thxComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: Dell G3 15 3500 bios help
Please any one Need this file dell selek_n18e_mb 18812-1 biosComment
-
Re: Dell G3 15 3500 bios help
TRY,, i am not sure if is ok my board was shortedComment
-
Re: Dell G3 15 3500 bios help
post the backup copy of the original laptop bios ...Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: Dell G3 15 3500 bios help
My backup copies corrupted, it should be 1 file 16M.B and the other file 8M.B
But my two files are 8M.B
When i try to open main bios on ME Analyser it give me this errors below:
"Error: firmware is incomplete/corrupted, expected 0x1800000 not 0x800000!"
"Warning: Firmware size exceeds Engine/Graphics region, possible data loss!"
"Note: Adjusted buffer to flash Descriptor 0x0 - 0x1800000!"Last edited by geeko; 10-29-2021, 08:06 AM.Comment
-
Comment
-
Re: Dell G3 15 3500 bios help
No brother, I used EZP2010-V3.0 and it's read the 16M.B BIOS as only 8M.B.
Now when i try to write the original bios >> keyboard back-light flashing and no data on screen and coolers not working<<
I tried this bios below it's turning on with maximum speed of coolers but with black screen please check it if you can repair itComment
-
Re: Dell G3 15 3500 bios help
If the programmer can only read the 16MB chip as 8MB don`t you think that it will only write 8MB as well,and in the process corrupt the bios.If the chip isn`t in the support list manually choose another 25Q chip that has same voltage and untick check-ID in the programmer settings,if there is such an option.Comment
-
Re: Dell G3 15 3500 bios help
working thanxComment
-
Re: Dell G3 15 3500 bios help
Good morning, I need the G3 15 Bios, board 19753-1 / fjt96$ja.
Anyone who has and can help, I really appreciate it.
Thanks.Comment
-
Re: Dell G3 15 3500 bios help
I found it here
https://www.badcaps.net/forum/showth...hlight=19753-1
TksComment
-
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,... -
Hi, I hope some one has some advice for me. I searched the forums but didn't see anything relevant. I acquired two identical Dell 9010 Mid Tower computers from a business office upgrade (they were going to throw them out). Both of them have the same motherboard (00F82W). One of them works flawlessly. The other one had a corrupted BIOS. I tried flashing numerous main BIOS and EC files from the internet, but none of them worked. I decided to copy the main BIOS and EC from the working 9010 computer and successfully flashed the corrupted BIOS. This got the computer able to boot again and run norm...04-23-2025, 04:30 PM -
Hey everyone,
I recently bought a Dell G15 5515 with an AMD Ryzen 7 5800H and 3060 RTX. The BIOS chip on it was dead, and my hardware guy replaced the chip. After that, everything was working fine.
The BIOS is currently at version 1.22.1, and I wanted to update it. I downloaded the latest BIOS version from Dell Support using my ST: FQZMYJ3, but when I tried to run it, it says "unsupported system." I asked my tech guy what he did, and he said he took the chip from another board and flashed it onto mine.
When I check the BIOS using the F12 menu Flash... -
Hi guys, can anyone help me with this bios? It needs to be cleaned.
Motheboard: GDI5A LA-K033P REV 1.0 (A00)
Service TAG: BNV5GD3
I've attached the two BIOS (16MB and 8MB). The laptop turns on but only displays a backlight. I tried another BIOS and it works fine, but I can't exit manufacturing mode. Thanks to anyone who can help me.... -
Hi,
Could someone help trying to unlock this BIOS, seems that Dell have changed the layout of new Dell Pro 8FC8 bioses from checking HXD - 4000 bits do not need changing, only 2000. However after FF the section starting from '01000' upto 2000 bits and then soldering the chip back it seems that the microchip on the motherboard is recovering the bios back to original settings after first boot. Has anyone found a way to crack this extra layer of security Dell have implemented? Seems both HP and Dell have upped bios security to match Lenovo by implementing extra measures on a separate...
Comment