Need UEFI Password Removed from my Surface Pro 5 BIOS DUMP

[c_hegge]

I have another Surface Pro 1807 (Serial Number 061195681953) with an admin password lock. Can this be cleared? Thanks to all in advance.

[MuertoGB]

For MDM/Autopilot lock, this is how to remove...

In the NVRAM, there are two NVARS we want to invalidate, these are FORCED_NETWORK_FLAG, and AUTOPILOT_MARKER. We do this by changing the NVAR valid flag to invalid.

FORCED_NETWORK_FLAG for me was at 0x604D7Ch, 3Fh changed to 3Ch.



AUTOPILOT_MARKER for me was at 0x605EA4h, 3Fh changed to 3Ch.



I also invalidated AName, and SetOEMStrings, but i'm unaware if this is absolutely necessary. Maybe someone can give me feedback.

[Zentimus Prime]

Re: Need UEFI Password Removed from my Surface Pro 5 BIOS DUMP

Hello i need help
I forgot my bios password can someone help me with this
The bin files is attached
Thank you for helping me

Please, how did you get your BIOS dump? I'm a newbie to this. I also have Microsoft Surface PRO 5 1807

[KABY]

I need surface pro 5 bios bin
I don't have surface serial number and original bin bios chip read nul
(Second hand motherboard bought on internet)
the logo appear for Second and turn off
model is M1013936-015
SP5 M3 4GB RAM 128GB SSD

[arobatik]

How are you going to do the flashing later? I can't flash via Intel Flash Programmin Tool because the BIOS entry write is locked. The only way is through the programmator.

I download and upload the firmware via the programmer

GGG

Thank you. All works.!!!

[hoaca388]

please clear uefi lock on my Surface Pro 1807,
SN:001479794453

GGG

[Slonique]

please clear uefi lock on my Surface Pro 1807,
SN:001479794453

How are you going to do the flashing later? I can't flash via Intel Flash Programmin Tool because the BIOS entry write is locked. The only way is through the programmator.

[arobatik]

please clear uefi lock on my Surface Pro 1807,
SN:001479794453

[Slonique]

I make dump from my Surface, but ISHC is set to Enabled. Hm...

[Slonique]

try..
https://www.badcaps.net/forum/showthread.php?t=104153

Good day!

I have MS Surface Pro 5 LTE i5 8/256 (s/n: 008996380153)
Yesterday, touch has gone after windows (firmware) update. (Neither win nor UEFI).

I already try it with other display (i have one), but result is the same.

There is some disclaimer In link you provided:
"
Always check a working dump from the same model using FIT.If the working dump default setting for "Integrated Sensor Hub Supported" is set to "NO" then do not change any settings,clean the ME as normal.
If your working dump models default setting for "Integrated Sensor Hub Supported" is set to "NO" and cleaning the ME firmware does not make the touchscreen work it could be a fault with the screen.
"

So, I need working dump.

And if you know topic about "how to dump UEFI from your Surface Pro device" - please provide link.

Please help.

Regards!

[peste]

please clear uefi lock.
Surface Pro 1796. SN:022480581053

try..

[khawaja0007]

please clear uefi lock.
Surface Pro 1796. SN:022480581053

[lngcs]

This one works. thank you both for helping.

[volinakis]

Hi Could some please help remove password. Surface pro 1796 s/n:023074581253.thanks

try

[lngcs]

Hi Peste, wrote the new bios back in and no power at all. won't turn on .

[peste]

Hi Could some please help remove password. Surface pro 1796 s/n:023074581253.thanks

try..

[lngcs]

Hi Could some please help remove password. Surface pro 1796 s/n:023074581253.thanks

[ronyx]

thank you it worked

[peste]

SN: 031122563453

tryu..

[ronyx]

SN: 031122563453