Slonique
New Member
Last Activity: 03-18-2025, 07:12 AM
Joined: 07-22-2024
Location: Kharkiv
-
Try this...
-
Have you replaced the screen?...Leave a comment:
-
I made a firmware with pure ME from my firmware. However, the touch did not appear.
...Leave a comment:
-
How are you going to do the flashing later? I can't flash via Intel Flash Programmin Tool because the BIOS entry write is locked. The only way is through the programmator.
...Leave a comment:
-
Good day!
I have Surface Pro 5 LTE (1807)
s/n 008996380153
After updating the firmware via windows update, the touch screen has disappeared.
I want to try clean the ME region, so I make the firmware according to the guides, but when I want to flash it (by FPTW64), I get an error:
[COLOR=#e74c3c]error 368: failed to disable write protection for the bios space[/COLOR]
Can I flash it through Intel Flash Programming Tool or only through the programmator?
Good day!
I have Surface Pro 5 LTE (1807)
s/n 008996380153Leave a comment:
-
I make dump from my Surface, but ISHC is set to Enabled. Hm...Leave a comment:
-
Good day!
I have MS Surface Pro 5 LTE i5 8/256 (s/n: 008996380153)
Yesterday, touch has gone after windows (firmware) update. (Neither win nor UEFI).
I already try it with other display (i have one), but result is the same.
There is some disclaimer In link you provided:
"
[B]Always check a working dump from the same model using FIT.If the working dump default setting for "Integrated Sensor Hub Supported" is set to "NO" then do not change any settings,clean the ME as normal[/B].
If your working dump models default...Leave a comment:
-
The thread is alive. I am also looking for it.
RegardsLeave a comment:
-
Good day fot Everyone!
I've been a programmer for more than 20 years, but I often come across various devices that need to be repaired and/or modified.
UkraineLeave a comment:
No activity results to display
Leave a comment: