Hello, I need a working dump for my laptop. On the native one there is no launch. Number r90az69l
Need Bios Dump for lenovo Carbon x1 20A7
Collapse
X
-
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Hi please a repair my bios dump
Lenovo x1 carbon
Type 20A7-005LMH
S/N R9-02GH4A 14/06
Motherboard
LMQ-1 MB
12298-2
48.4LY06.021Comment
-
Attached FilesComment
-
Comment
-
does anyone have an older version of the bios for it? it seems to me that the new one is somehow faulty from what I look at on the internet. I'm coming back to the topic of this computer.Comment
-
Comment
-
Did you replace all the RAM chips on both sides? I wonder if it will start if I desolder the chips individually or if it needs a complete set. I haven't looked at the diagram yet to see if they need to be in a complete set for it to start.Comment
Related Topics
Collapse
-
by mrkmpnLenovo X1 Carbon 7th Gen Type 20R1
SN: PF1Y5BBJ
Board: GX490 NM-C661 Rev: 1.0
I have made two dumps of this bios, with the bios chip removed from the board and the hashes match on both dumps, but I cannot find the DMI information in the dumps except for the Windows product key, so I think it is corrupted. I have downloaded two bios updates from the Lenovo support site, but they contain small .PAT file, and 4 subfolders containing .FL1 and .FL2 files, which I don't understand enough to figure out how to use to fix my dump.
The problem with the laptop is that...-
Channel: BIOS Requests ONLY!
-
-
by AHmad_SalalHello all,
I have a Lenovo Thinkstation P500 that is stuck at post with no display, it happened after I changed the memory timings in bios. I can not clear CMOS using the jumper on the motherboard, also tried re-flashing bios suing a USB stick but it also doesn't work. The only solution that I can think of right now is re-flashing the bios chip using an external programmer but the problem is that I don't have the bios dump of p500 for flashing externally and I don't know the location of bios chip. If someone can provide the bios dump and bios chip location it would be really helpful....-
Channel: BIOS & Schematic Requests!
-
-
by Habble7The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
...-
Channel: Troubleshooting Computer Displays
-
-
by Gangubasuslenovo thinkpad x1 carbon gen 12
Model 21KC-FVT001
S/N PF-4CQ9FG
CPU genuine intel(r) cpu 0000
BIOS N3YET06C (0.06)
Hello! I need help getting a modified BIOS for my system. Since I have an engineering processor, is it possible to add the microcode of this engineering processor to the latest BIOS for this laptop model? I think since the BIOS is old, that's why the Wi-Fi driver is not installed on Win10 and Win11, the sound is not adjusted (error code 10 in the device manager) and the screen brightness. The laptop also has BIOS chips W25Q512NW and W25Q128JV, how can...-
Channel: BIOS Requests ONLY!
-
-
by ericoFirst of all, ive veen reading these forums for some time and its always veen very helpful, so i thank you all for this amazing comunity.
I have a lmq-2 13268-1 motherboard from a lenovo x1 carbon 3rd gen. And the MX25l12873f (U49) bios pin 8 is not getting voltage.
So far these are my diagnostics:
When given 19v trough power adapter, consumption reads 0.003 amps for about 5 seconds then nothing.
When power button pressed same result, and i get three green blinking lights from the pwr btn led. But foesnt turn on.
If i plug the battery... - Loading...
- No more items.
Comment