Hello, I need a working dump for my laptop. On the native one there is no launch. Number r90az69l
Need Bios Dump for lenovo Carbon x1 20A7
Collapse
X
-
X1 Carbon 2nd Gen Laptop (ThinkPad) - Type 20A8
Attached Filesif you find these attachements useful please consider making a small donation to the site
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
Hi please a repair my bios dump
Lenovo x1 carbon
Type 20A7-005LMH
S/N R9-02GH4A 14/06
Motherboard
LMQ-1 MB
12298-2
48.4LY06.021Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
hi try and feedbackAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
Comment
-
does anyone have an older version of the bios for it? it seems to me that the new one is somehow faulty from what I look at on the internet. I'm coming back to the topic of this computer.Comment
-
Comment
-
Did you replace all the RAM chips on both sides? I wonder if it will start if I desolder the chips individually or if it needs a complete set. I haven't looked at the diagram yet to see if they need to be in a complete set for it to start.Comment
Related Topics
Collapse
-
by mrkmpnLenovo X1 Carbon 7th Gen Type 20R1
SN: PF1Y5BBJ
Board: GX490 NM-C661 Rev: 1.0
I have made two dumps of this bios, with the bios chip removed from the board and the hashes match on both dumps, but I cannot find the DMI information in the dumps except for the Windows product key, so I think it is corrupted. I have downloaded two bios updates from the Lenovo support site, but they contain small .PAT file, and 4 subfolders containing .FL1 and .FL2 files, which I don't understand enough to figure out how to use to fix my dump.
The problem with the laptop is that...-
Channel: BIOS Requests ONLY!
-
-
by AHmad_SalalHello all,
I have a Lenovo Thinkstation P500 that is stuck at post with no display, it happened after I changed the memory timings in bios. I can not clear CMOS using the jumper on the motherboard, also tried re-flashing bios suing a USB stick but it also doesn't work. The only solution that I can think of right now is re-flashing the bios chip using an external programmer but the problem is that I don't have the bios dump of p500 for flashing externally and I don't know the location of bios chip. If someone can provide the bios dump and bios chip location it would be really helpful....-
Channel: BIOS & Schematic Requests!
-
-
by AhariHi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I...-
Channel: BIOS & Schematic Requests!
-
-
by hyperwoodHi everyone,
I’m looking for a 2 MB BIOS dump for a Lenovo IdeaPad 5 16ARH7H / Legion 5 with mainboard NM-E471 Rev. 2.0.
The BIOS chip is a Winbond W25Q16FW (1.8V, 2MB) and it's completely unresponsive / bricked. I tried recovery via USB but no success. Now I want to reflash it externally using a CH341A programmer.
I already found 32MB dumps (e.g. from Vinafix and Badcaps), but they are too large for the chip – and the last 2MB in those files are just FF FF FF....
✅ What I need:- A working 2MB BIOS dump
- Matching NM-E471 Rev. 2.0, e.g. JY575
-
Channel: BIOS Requests ONLY!
-
by mkdjDear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Comment