Hello, I need a working dump for my laptop. On the native one there is no launch. Number r90az69l
Need Bios Dump for lenovo Carbon x1 20A7
Collapse
X
-
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Hi please a repair my bios dump
Lenovo x1 carbon
Type 20A7-005LMH
S/N R9-02GH4A 14/06
Motherboard
LMQ-1 MB
12298-2
48.4LY06.021Comment
-
Attached FilesComment
-
Comment
-
does anyone have an older version of the bios for it? it seems to me that the new one is somehow faulty from what I look at on the internet. I'm coming back to the topic of this computer.Comment
-
Comment
-
Did you replace all the RAM chips on both sides? I wonder if it will start if I desolder the chips individually or if it needs a complete set. I haven't looked at the diagram yet to see if they need to be in a complete set for it to start.Comment
Related Topics
Collapse
-
by mrkmpnLenovo X1 Carbon 7th Gen Type 20R1
SN: PF1Y5BBJ
Board: GX490 NM-C661 Rev: 1.0
I have made two dumps of this bios, with the bios chip removed from the board and the hashes match on both dumps, but I cannot find the DMI information in the dumps except for the Windows product key, so I think it is corrupted. I have downloaded two bios updates from the Lenovo support site, but they contain small .PAT file, and 4 subfolders containing .FL1 and .FL2 files, which I don't understand enough to figure out how to use to fix my dump.
The problem with the laptop is that...-
Channel: BIOS Requests ONLY!
-
-
by AHmad_SalalHello all,
I have a Lenovo Thinkstation P500 that is stuck at post with no display, it happened after I changed the memory timings in bios. I can not clear CMOS using the jumper on the motherboard, also tried re-flashing bios suing a USB stick but it also doesn't work. The only solution that I can think of right now is re-flashing the bios chip using an external programmer but the problem is that I don't have the bios dump of p500 for flashing externally and I don't know the location of bios chip. If someone can provide the bios dump and bios chip location it would be really helpful....-
Channel: BIOS & Schematic Requests!
-
-
by AhariHi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I...-
Channel: BIOS & Schematic Requests!
-
-
by hyperwoodHi everyone,
I’m looking for a 2 MB BIOS dump for a Lenovo IdeaPad 5 16ARH7H / Legion 5 with mainboard NM-E471 Rev. 2.0.
The BIOS chip is a Winbond W25Q16FW (1.8V, 2MB) and it's completely unresponsive / bricked. I tried recovery via USB but no success. Now I want to reflash it externally using a CH341A programmer.
I already found 32MB dumps (e.g. from Vinafix and Badcaps), but they are too large for the chip – and the last 2MB in those files are just FF FF FF....
✅ What I need:- A working 2MB BIOS dump
- Matching NM-E471 Rev. 2.0, e.g. JY575
-
Channel: BIOS Requests ONLY!
-
by Habble7The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
...-
Channel: Troubleshooting Computer Displays
-
- Loading...
- No more items.
Comment