
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Thank you...
-
hello friends! help me clear the password on my macbook air a1466
EMC3178
s/n FVFXKNEEJ1WK
Thanks!...
Leave a comment:
-
Thank you very much! Everything worked as it should, only the touchpad didn't work, maybe the problem is in it....
Leave a comment:
-
-
-
I had the same problem, in the end the problem turned out to be in the RAM memory...
Leave a comment:
-
Hello! I received a laptop with a replaced motherboard and without a chip. I installed the chip and flashed it with the file from the quoted message (for testing). The laptop starts up and everything works except the keyboard and touchpad (the keyboard backlight also does not turn on, I tried other files, the laptop worked very poorly on them, but the backlight lit up). Please help!
MB: A1502 820-4924-A
Back cover S/N: C02QRT57FVH5...
Leave a comment:
-
https://[url]https://www.badcaps.net...<br /> Thanks![url]https://www.badcaps.net/forum/troubleshooting-hardware-devices-and-electronics-theory/troubleshooting-laptops-tablets-and-mobile-devices/schematic-requests-only/3268536-macbook-a1708-820-00840-%D0%B0[/url]
Thanks!
- Selected Answer
Leave a comment:
-
Macbook A1708 / 820-00840-A / Help with find the IC pins
Help me find the IC pins. My motherboard has a burnout in the place marked with a yellow square. I need to find out where these two contacts are connected. Since there is no boarview for this modification, I need help from more experienced technicians.
Macbook A1708 / 820-00840-A
IC PI3USB32324AXEAE...1 Photo
-
Hello, I need a working dump for my laptop. On the native one there is no launch. Number r90az69l...
Leave a comment:
-
-
Hello, friends. Please help me with the BIOS dump. I have the original file and it is broken, the laptop does not start, the consumption is 10-35 mA. On the first dump downloaded here the laptop started....
Leave a comment:
-
HP Z2 G4 sff need help identifying component
HP Z2 G4 sff motherboard revision 1.0, I can't determine the real name of this regulator. It is located in the power line of two usb 3 ports. If you know what can replace it, I would be grateful...
-
Re: HP Z2 G4 SFF rev 1.0 need BIOS+EC
Thanks It works! All that remains is to transfer the serial number and other data. The rear 3.0 USB ports do not work. 2.0 usb works. but maybe there is a problem with the board
buddy, you helped me out a lot...
Leave a comment:
-
No activity results to display
Show More
Leave a comment: