hp 840 g6 6050A3022501-MB-A01
Collapse
X
-
-
Comment
-
Attached FilesComment
-
SN# 5CG014CJ3G ,i used your bios posted her it's working but just with this picture please help.Comment
-
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Comment
-
Rremove battery , disconnect even the 3V cell , write my version of BIOS, plug in the charger and go for a walk for 30 minutes, or take a nap. Do not touch any buttons not even the power button ...
If your hardware is OK as you say the laptop must start in MPM mode.Comment
-
I told you to be patient.
Rremove battery , disconnect even the 3V cell , write my version of BIOS, plug in the charger and go for a walk for 30 minutes, or take a nap. Do not touch any buttons not even the power button ...
If your hardware is OK as you say the laptop must start in MPM mode.Comment
-
-
I solve display issue with this dump.thanks for help.Attached FilesComment
-
hi there to all pro's
hp 840 g6 laptop , or craptop ,, motherboard 6050a3022501
all voltages good except on L66310 which i persume are gor the graphics side ..
i have tried all bios and ec bios on this forum from page 1 to 25 , laptop powers up , you can spot the the lcd goes black as the 3v is ok , but no backlight no graphics or post
laptop runs with power led on and cpu fan spins as it should
all this but still no post ,,
any advise or sugesstions would be appriciated
thanks all
waiting for reply
Comment
-
pls help , from this bios Display is coming very late
Model HP Elitebook 840 G6
S/N :- 5CGO429R97
Attached FilesComment
-
Comment
-
Need Help for BIOS 1mb HP Elitebook 840 G6 (Crescent-6050A3022501-MB-A01)
MXIC
MX25L800GE2NI (Bios Size 1MB)
This chip already flash by other technician, and we dont have backup file.. anyone have a backup file, please share, thanks before1 PhotoComment
-
Here you are...
Mine is Winbond 25Q80DVIGAttached FilesComment
-
Comment
-
Comment
-
update after i flash this file, the laptop still not turn on, i think the problem not from bios file anymore the bios is OK, another suspect is 3.3V ic DC/DC was defect because the output voltage only 2.64V. i will try to replace this IC. Thanks for your help Master
Good Luck!Comment
Related Topics
Collapse
-
by snpetitHi,
i need some help :-/
i deleted in Bios the Admisnistrator password with old password, but after it didn't allow me to modify the User password. Now i can't boot, enter the bios or do anything. It asking at boot for password, old password don't work...
Could you please remove all password related stuff from this bios. A hate Asus....
Thanks in advance!...-
Channel: BIOS Requests ONLY!
-
-
by tlindiSublect line continuation: ... Jaguar IDS PC aka Panasonic
>Read BIOS guides, methods, resources and tools
>
Ack
>Try the method at BIOS guides, methods, resources and tools before requesting help
>
Ack
>Explain you were not able to succeed with the methods at BIOS guides, methods, resources and tools
>
python ./main.py "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.BIN" --output-dir "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.txt"
------------------------------------------------...-
Channel: BIOS Requests ONLY!
-
-
by fx1982Hi everyone, can someone please help to remove bios Administrator password or decode as I failed miserably... Tried reading the password but it says wrong password. Thank you in advance!
It's a 2024 Asus Zephyrus G16
GU605MV
SN: S2NRCX035924088
CN: AEDW
MFD: 2024-02 36M
BIOS VERSION: 315...-
Channel: BIOS Requests ONLY!
-
-
by AJ847.63eHi All,
Just wanted to ask is it possible to remove admin user accounts on Mojave when you do not have the admin password for the account you want to remove? We have our own account setup as an admin but the customers setup their own also as an admin.
We have a loaner A1708 we leant to a customer while we were repairing her A2442. Customer decided she would setup her own account despite me setting up an account for her. We obviously do not have her password and unfortunately, she cannot remember what password she used so now we have a second admin account we would... -
by ritaloHello,
I have a MacBook Air 13 inches 2014.
I have set a EFI password and I can't remember it : now I want to reinstall macOS and I can't because the MacBook is asking for the password.
I know how to remove the password with a usb programmer.
I plug the usb programmer to the motherboard and to my pc with usb, I read the EFI and I save it to a file.
Then I have to find this value in the file : $SVS because it indicate where is the password.
But I can't find the value.
I have attached the file
Thank...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Comment