Dell p28f 3537 LA-9982P bios need

[lebana]

Re: Dell p28f 3537 LA-9982P bios need

thank u

[mahmoodgl]

Re: Dell p28f 3537 LA-9982P bios need

gooooooooooooooooood

[ahmed3shmawi]

Re: Dell p28f 3537 LA-9982P bios need

THANK YOU VERY MUCH

[sherifbekhit]

Re: Dell p28f 3537 LA-9982P bios need

thank you too much

[lapzlapz]

Re: Dell p28f 3537 LA-9982P bios need

Thanksssssss

[Sanjeewait]

Re: Dell p28f 3537 LA-9982P bios need

Hi.
My dell 3537 laptop working time auto off. No heating, cooler fan good. This error mother board. How to fix this error any one help me.

[Pascal Komlassan]

Re: Dell p28f 3537 LA-9982P bios need

please someone can help me remove bios password from dell p28f

[Esse]

Re: Dell p28f 3537 LA-9982P bios need

Senior Pascal,give us the picture of your dell code you are talking about

[Pascal Komlassan]

Re: Dell p28f 3537 LA-9982P bios need

Senior Pascal,give us the picture of your dell code you are talking about

okay

[imranromi]

Re: Dell p28f 3537 LA-9982P bios need

The password is store ene kb9012 a3.

[Pascal Komlassan]

Re: Dell p28f 3537 LA-9982P bios need

Okay somebody can give me the dump of ENE kb9012 a3 ?

[EP3RROR]

Re: Dell p28f 3537 LA-9982P bios need

thanks a lot first posted bios worked on dell 3537 that was not booting , restarting on boot!

[bachir2004]

Re: Dell p28f 3537 LA-9982P bios need

okay

try this code at code prompt:20290990

[Pascal Komlassan]

Re: Dell p28f 3537 LA-9982P bios need

try this code at code prompt:20290990

thank you my brother I tested the code but it did not work. Any help?

[lebana]

Re: Dell p28f 3537 LA-9982P bios need

thank u

[electronic500]

Re: Dell p28f 3537 LA-9982P bios need

الجهد منخفض فى لاب توب ديل 5537 من 19 الى 17 فولت

[hkvaks]

hey guys,
can any one tell me what should be +VCHGR. Or how much volt should be on pl701 ?
m having 13.5v.

thanks in advance.

Getting the same voltage here. Board not turning on. Will check 2moro and update

[hkvaks]

Getting the same voltage here. Board not turning on. Will check 2moro and update

Ok. That voltage is supposed to be 13.3v according to schematic so its very much OK. Apparently my problem was SR16Z main chip (Haswell Cpu+Pch) needed reflow. Board now turning on and working fine

[watanirar]

Re: Dell p28f 3537 LA-9982P bios need

thanks very much

[yoseef]

Re: Dell p28f 3537 LA-9982P bios need

thank you