Re: Software like driverpack solution
I only get the try version...
Esse
Badcaps Veteran
Last Activity: 07-31-2020, 04:46 AM
Joined: 04-15-2014
Location: Lomé
-
Re: car, motorcycle programming or decoding
Please can you give me the Manuel of this particular car Ford Fiesta 2002 1.4dtci dieselLeave a comment:
-
Re: car, motorcycle programming or decoding
Any help?Leave a comment:
-
Re: Software like driverpack solution
Can u give me its link?...Leave a comment:
-
Software like driverpack solution
looking for best software like driverpack solution to install manuelly laptops drivers
thanks -
Re: car, motorcycle programming or decoding
I've cleaned the MAF sensor too.please if you think it can be this MAF why the scan is not giving any code related to that?...Leave a comment:
-
Re: car, motorcycle programming or decoding
Please can u get me a diagram or a schematic document about the inside of my car?so that I can trace the DPFELeave a comment:
-
Re: car, motorcycle programming or decoding
I'm not seeing that DPFE sensor on my car,can u show me some pictures of it on Ford Fiesta vehicle?Leave a comment:
-
Re: car, motorcycle programming or decoding
Any help pleaseLeave a comment:
-
Re: car, motorcycle programming or decoding
This is my EGR
My mechano say my EGR is not faulty and we’ve cleaned it and but it back
Please I want to understand something,why my scanner is saying with P0401 code that there is something wrong with my EGR,since my there is no wire connection with the EGR
Please need your explication...Last edited by Esse; 11-30-2018, 09:25 AM.Leave a comment:
-
Re: car, motorcycle programming or decoding
I've cleaned it and scan the car ,still the same code...Leave a comment:
-
Re: car, motorcycle programming or decoding
I cleared the codes and this morning I scan my car again therefore the scan gives me only one code:P0401
Your advice please,should I change the EGR or clean it?...Leave a comment:
-
Re: car, motorcycle programming or decoding
what voltage my battery should give me?...Leave a comment:
-
Re: car, motorcycle programming or decoding
Please can i use alcool to clean MAF sensor?Leave a comment:
-
Re: car, motorcycle programming or decoding
didnt get you well when saying pulling plugs off and on when ignition is onLeave a comment:
-
Re: car, motorcycle programming or decoding
These are the code the scanner gives me:
P0401
P0113
P0102
P0342
P0480
P0088
P0200
So give me your advice pleaseLast edited by Esse; 11-28-2018, 10:39 AM.Leave a comment:
-
Re: car, motorcycle programming or decoding
Please what is live data?and how to you check thatLeave a comment:
-
Re: car, motorcycle programming or decoding
i continue testing my flow sensor,now car on i get 2V on the pin 5 and when i accelerate the gase pedal i getting 2.4 OR 2.5 so on.but the problem is ,when still accelerating the EAC fail come on the board ,at the same time the voltage at pin 5 come straight down at 1.05 and it starts getting down and up like 1.04 to 2.0V
PLEASE can you tell me if my flow sensor is good?Leave a comment:
-
Re: car, motorcycle programming or decoding
AS i already said my car is ford fiesta 2002 1.4 dtci DIESEL
Can you tell me by this giving information if my flow sensor is faulty:
-at key on ,the 4th pin of my flow sensor gives me 0volt and the 5th gives 0V
-when i start the car the 4th pin still remains at 0V but the 5th gives up to 1.90 with acceleraring the pedal gase but cannot even reach 2V
hope you will help meLeave a comment:
-
Re: car, motorcycle programming or decoding
Has anybody encounter this problem or ford fiesta 1.4 DTCI ?how to solve itLeave a comment:
No activity results to display
Leave a comment: