Re: Dell Inspiron 7400 _ 19765-1 NAKIA-SHURIN7 TGL MP MB Bios Bin
hello. it still boots to Manufacturer mode and loses the Service tag on next reboot. it keeps booting to Manufacturer mode no matter how many times you enter and save the Service Tag , it loses the service tag all the time....
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Dell Inspiron 7400 _ 19765-1 NAKIA-SHURIN7 TGL MP MB Bios Bin
this bios only worked for a few boots (1 to 3 boots) after that the machine freeezes on dell logo or sometimes no Display , only comes back when you reflash with bios again. I have another bios file of which the machine works and boots normally all the time but the Fan speed is high (max) and it goes to MAnufacturer Programming Mode all the time and asks for Service Tag no matter how many times you enter it. I have attached the bios file which does that below....
Leave a comment:
-
Re: Dell Inspiron 7400 _ 19765-1 NAKIA-SHURIN7 TGL MP MB Bios Bin
hello guys , I know this could be opening an "Old Can" but each time i try to open this Bios file with Intel Flash Image tool i get the error: "Unable to open {file name and location} . Reverting to Dfault Configuration. Error 179: Failed to Parse CSE Region etc etc as shown on picture...Last edited by hkvaks; 10-04-2022, 02:38 AM.
Leave a comment:
-
Dell Inspiron 7400 _ 19765-1 NAKIA-SHURIN7 TGL MP MB Bios Bin
hello , Can i please have Working Bios for board 19765-1 NAKIA-SHURIN7 TGL MP MB
(Dell Inspiron 7400)
-
Re: need bios dump dell latitude 5420 (cpu 11th)
Yes it is....
Leave a comment:
-
Re: need bios dump dell latitude 5420 (cpu 11th)
NEVER MIND. I UNLOCKED IT BY MYSELF...
Leave a comment:
-
Re: need bios dump dell latitude 5420 (cpu 11th)
Hello. Please help unlock Bios admin password for my file.
Dell Latitude 5420. Service tag is on file name.Last edited by SMDFlea; 04-02-2023, 01:30 PM.
Leave a comment:
-
Ok. That voltage is supposed to be 13.3v according to schematic so its very much OK. Apparently my problem was SR16Z main chip (Haswell Cpu+Pch) needed reflow. Board now turning on and working fine...
Leave a comment:
-
Getting the same voltage here. Board not turning on. Will check 2moro and update...
Leave a comment:
-
Re: PM_I_hpc_s mv_mb_v3
Im having exact same problem on that board. The 5VAL and 3.3VAL, 3.3VA is there, but 5VA comes after pressing the power switch on this board. Bios voltage 3.3VS also comes after pressing switch as well. I checked all signals from EC ite8502e after switch on, i get rmsrst# , ec_pwrbtn#, ec_alw_en# but somehow i dont get the slp_s5# signal back from the PCH. I dont get any voltage on the two top capacitors of the PCH....
Leave a comment:
No activity results to display
Show More
Leave a comment: