HELLO EVERYONE
please can someone UNLOCK this dump
:HP EliteBook 640 14 inch G10 Notebook PC
SerialNumber:5CD4445USQ
Upload both files
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
unfortunately writing this back to main ROM does not do the trick.
HP Sure Start Recovery detected an unauthorized change to the secure boot keys.
Reboot
The BIOS has recovered its identity from the Embedded Controller due to data mismatch
Reboot
HP Sure Start detected corruption in the Intel Management Engine firmware. Select Continue to complete the full recovery process of Intel Management Engine firmware.
Reboot
Windoze
The EC is in the original archive together with main. Unsure what DMI means but I have now read out the config with BCU using /getconfig.
DMi is data machine ID (serial, built id, sku, etc) you'll find them in file got with BCU. After writing files I provide you (write both main+EC) your laptop will enter in manufacturing program mode (MPM). At 1st boot enter in bios setup (F10) and apply factory defaults. after that let it boot in windows and read again DMI with BCU, open both files and fill empty fields from last file with values got in 1st file, including MAC Adress. Also move * from "Mpm Mode" from Enable to Disable, save file then use BCU to write new file. I use commands "biosconfigutility /get:lock.txt" and " biosconfigutility /set:new.txt " (or whatever you named your files got with BCU, I am using BCU v4.0)
good luck!
DMi is data machine ID (serial, built id, sku, etc) you'll find them in file got with BCU. After writing files I provide you (write both main+EC) your laptop will enter in manufacturing program mode (MPM). At 1st boot enter in bios setup (F10) and apply factory defaults. after that let it boot in windows and read again DMI with BCU, open both files and fill empty fields from last file with values got in 1st file, including MAC Adress. Also move * from "Mpm Mode" from Enable to Disable, save file then use BCU to write new file. I use commands "biosconfigutility /get:lock.txt" and " biosconfigutility /set:new.txt " (or whatever you named your files got with BCU, I am using BCU v4.0)
good luck!
The main file causes NeoProgrammer to crash with the not so useful error message "file not open". The same goes for the EC file from post #70, Unlock.rar.
So I don't have a complete package where both files work.
Is NeoProgrammer 2.2.0.10 not recommended? I just picked one of the mentioned applications from some intro forum post.
Hello everyone
please help me to un unlock password bios for HP 645 G10
I used Tiny Hexer In the first boot BIOS has recovered identity from MAIN
SN 5CD340FQ19
BIOS V77 VER 01.03.01
first boot press f10 apply factory defaults and restart 2nd boot reset security settings to defaults exit.
use bcu
This DMI is extracted from your main.
Serial Number: 5CD3497XYC
Product #/SKU: 917G0EC#ABF
CT Number: PRVNR068JIW19B
Description: HP EliteBook 650 15.6 inch G10
BuildID: 23WWKRBZ602#SABF#DABF
Feature Byte: 476J6S6b7B7H7M7Q7W7m7saBaEapaqauawbhcAfPguhKhkjhk8mEn7nVpDpVpnpqprqMqz.FQ
MAC Address : D0:AD:08:B5:B5:EA
first boot press f10 apply factory defaults and restart 2nd boot reset security settings to defaults exit.
use bcu
This DMI is extracted from your main.
Serial Number: 5CD3497XYC
Product #/SKU: 917G0EC#ABF
CT Number: PRVNR068JIW19B
Description: HP EliteBook 650 15.6 inch G10
BuildID: 23WWKRBZ602#SABF#DABF
Feature Byte: 476J6S6b7B7H7M7Q7W7m7saBaEapaqauawbhcAfPguhKhkjhk8mEn7nVpDpVpnpqprqMqz.FQ
MAC Address : D0:AD:08:B5:B5:EA
first boot press f10 apply factory defaults and restart 2nd boot reset security settings to defaults exit.
use bcu
This DMI is extracted from your main.
Serial Number: 5CD3497XYC
Product #/SKU: 917G0EC#ABF
CT Number: PRVNR068JIW19B
Description: HP EliteBook 650 15.6 inch G10
BuildID: 23WWKRBZ602#SABF#DABF
Feature Byte: 476J6S6b7B7H7M7Q7W7m7saBaEapaqauawbhcAfPguhKhkjhk8mEn7nVpDpVpnpqprqMqz.FQ
MAC Address : D0:AD:08:B5:B5:EA
I tried many times laptop not turning on with this file pls send me another file
Número del producto: 87D79EC#ABM Número de serie: 5CD408C1M0
Placa del sistema
8B88 KBC Version 52.39.00
BIOS del sistema
V75 Ver. 01.07.01
Please unlock password hp elitebook 640 g10
Product number: 87D79EC#ABM Serial number: 5CD408C1M0
System board
8B88 KBC Version 52.39.00
System BIOS
V75 Ver. 01.07.01
Comment