Re: IC Marking Codes and Datasheets #2
reserved 20
reserved 20
-
-
Re: IC Marking Codes and Datasheets #2
reserved 21Comment
-
Re: IC Marking Codes and Datasheets #2
reserved 22Comment
-
Re: IC Marking Codes and Datasheets #2
reserved 23Comment
-
Re: IC Marking Codes and Datasheets #2
reserved 24Comment
-
Re: IC Marking Codes and Datasheets #2
reserved 25Comment
-
Re: IC Marking Codes and Datasheets #2
Hello friends, I can't identify this component that seems to be from MPS.
DDJ 213 without screen printing on a motherboard model: IP3_VN12_MB_V21_20181105AAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
Re: IC Marking Codes and Datasheets #2
Post more details of other markings from your logic board.
What brand ? Model ? You will have other silk screens on the board. Perhaps a schematic is floating for your unit.Comment
-
Re: IC Marking Codes and Datasheets #2
Notebook manufacturer: Feed Me
Model: Laptop-S17
Board: IP3_VN12_MB_V21_20181105AAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
Re: IC Marking Codes and Datasheets #2
Hi
Asus GL 752VW rev 2.0:
mosfet driver marked 5E=3D
I have MB boardview archive containing these files:
format.asc
imgui.ini
nails.asc
nets.asc
parts.asc
pins.asc
but...: i'm not able to read component name with Boardview (tested 3 different softwares)?
Any help?
Thx
SlangLast edited by Slang; 08-13-2022, 05:47 PM.Comment
-
Re: IC Marking Codes and Datasheets #2
ASC format does not contain part numbers unlike FZ.
https://www.badcaps.net/forum/showpo...84&postcount=2OpenBoardView — https://github.com/OpenBoardView/OpenBoardViewComment
-
Re: IC Marking Codes and Datasheets #2
Monolithicpower MP2015AGG https://www.monolithicpower.com/en/d...n/sku/MP2015A/Comment
-
Re: IC Marking Codes and Datasheets #2
Thank you very muchComment
-
Re: IC Marking Codes and Datasheets #2
Hello, help me to identify component.
Marking: fMCPD
Motherboard: LA-K201P
Thank you in advance.Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
Re: IC Marking Codes and Datasheets #2
5E= > RT8248AGQW
https://cdn.badcaps-static.com/pdfs/...32575b5a2f.pdfComment
-
Re: IC Marking Codes and Datasheets #2
Can anyone help me find an equivalentAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
Re: IC Marking Codes and Datasheets #2
if anyone can help pleaseComment
-
Re: IC Marking Codes and Datasheets #2
Post again in the "List of pin compatible Laptop ICs" thread https://www.badcaps.net/forum/showthread.php?t=33846Comment
-
Re: IC Marking Codes and Datasheets #2
Ei*** -> sy6827
ajy*** -> sy8213Comment
-
Re: IC Marking Codes and Datasheets #2
Can anyone help me find the real name of this component?
DELL MIH81R TIGRIS MT MB 12124-2 (OptiPlex 3020 )
7A 2A
K3C
https://www.badcaps.net/forum/attach...1&d=1664725985Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
Thread started and edited by piernov and SMDFlea. All members are welcome to contribute to the thread, if you have any
pictures, suggestions, spot any mistakes or want new content adding send me a PM or just make a post. Thanks
EDIT: See "IC Marking Codes and Datasheets #2" for more posts. All members please post comments in thread #2.
__________________________________________________ __________________________________________________ ________
Click on the name next to the post # to view the single post... -
Ricoh Power Management IC`s Marking Codes
The attached pdf titled "Ricoh PMIC`s Marking Codes,pdf" was made by me from the main pdf Ricoh_MARKINGS.
....06-06-2021, 12:29 PM -
Hello folks, I seem to have a lot of trouble when it comes to distinguishing markings on SMD components especially when it comes to the question of whether it is a 1 or an I. for example, I see components marked NI. It looks just like that. However, I cannot tell if that "I" might be a number one instead. Is there a rule of thumb that manufacturers use when using these characters? Attached is an example. This is just one example out of many I come across but it's a good illustration of my point. I appreciate any input.... -
im working on HP Probook 450 g5 with no power issue and found out coil beside this ic is short to ground...i remove the ic and short gone....ic code AQP,...looking on this ic marking code but not found https://www.badcaps.net/forum/troubl...and-datasheets...
-
Had someone drop off a laptop in which they were upgrading the ram but forgot to unplug the battery.
Looks like the ram RFI shield shorted a rail going to or coming from a Silergy IC which blasted a component off the board. I'm going to assume it was a cap but really have no way to know for sure since this board schematic doesn't appear to be in the wild yet.
I'm trying to identify the IC model now but it doesn't appear to match any of the Silergy codes from https://www.badcaps.net/forum/troubl...-tablets-and-m...
Comment