well receive this machine , shes turning on altough its not giving image , we've notice PL201 is getting bloody hot , if there is a cpu present this coils gets hot like hell , we thinked could be the cpu was bad , but even with another cpu does the same.
now after starting writing this , i made a new clean to the board since many spots were bit dirty , (this was on a previous store before)
after making clean the coils is no longer getting hot , altough i dont have any values on it , and its making the caps lock blink (seems IGP) but this board is with strange behavior , will now try replace this IGP with a working used one just be sure , but your opinions will be welcome .
now after starting writing this , i made a new clean to the board since many spots were bit dirty , (this was on a previous store before)
after making clean the coils is no longer getting hot , altough i dont have any values on it , and its making the caps lock blink (seems IGP) but this board is with strange behavior , will now try replace this IGP with a working used one just be sure , but your opinions will be welcome .
Comment